Specifications

Specifications
DESCRIPTION
• Brass spout and metal handle construction with Chrome nish
• 3/8" compression stainless steel supply lines
• No lift rod hole in models without drain
• Vandal resistant aerator and handle assembly
• Red and Blue plastic indicator inserts
OPERATION
• Lever style handle
• Temperature controlled by 100° arc of handle travel
FLOW
• Standard aerator is limited to 1.5 gpm max (5.7 L/min)
• Eco-performance aerator is limited to 0.5 gpm max (1.9 L/min)
CARTRIDGE
• 1255 Duralast™ cartridge with brass adjustable temperature
limit stop
• Nonmetallic/nonferrous and ceramic material
STANDARDS
• Third party certied to meet WaterSense® (only applies to
1.5 gpm), ASME A112.18.1/CSA B-125.1 and all applicable
requirements referenced therein
• Certied to ANSI/NSF 61/9 & 372
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal
Safe Drinking Water Act
• ADA for lever handles
WARRANTY
• Warranted for 5 years against material or manufacturing defects
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
6-3/4"
(171mm)
8"
(204mm)
4"
(102mm)
2"
(51mm)
4-1/2"
(114mm)
6-1/2"
(165mm)
4-7/8"
(124mm)
3-3/4"
(95mm)
MAX.
4/15
M•Dura™
Single-Handle Lavatory Faucet
Model Flow (gpm) Drain WaterSense®
9417F15 1.5 Without X
9417F05 0.5 Without
9419 1.5 All Metal X
9419F05 0.5 All Metal
NOTE: THIS FAUCET IS DESIGNED TO BE
INSTALLED THRU 1 HOLE, 1-1/4" MIN. DIA.
See table above