Installation Guide

25300 AL MOEN D R I VE  N OR TH OLMSTED , OH 44070
C OR POR ATE H EAD QU AR TER S: ( 800) 321-8809  F AX: [phone]
I N TER N ATI ON AL: [phone]  FAX: [phone]
C U STOMER SER VI C E (U SA): 800 -882-0116  F AX: [phone]
W W W . MOEN . C OM
Copyright Creative Specialties International Literature #BA1485
 BP5380CH – European Paper
Holder
Polished Chrome Finish
Concealed Screw Mounting
 BP5380OWB – European Paper
Holder
Old World Bronze Finish
Concealed Screw Mounting
 BP5380SN – European Paper
Holder
Satin Nickel Finish
Concealed Screw Mounting
Cleaning Instructions:
1. Mounting hardware is included in the packaging.
2. Remove the mounting bracket from the back of fixture by loosening the set
screw.
3. Position the base on wall where desired.
4. Lightly mark the outline of the base(s).
5. Center mounting bracket in the outline. Position the square end to face up.
6. Mark the location of each hole. Screw into a wood stud or use the provided
toggle bolts.
7. Mount the base on the bracket. Plece the fixture on the mounting bracket and
tighten the set screw on the bottom
Stock Number:______________________European Paper
Holder By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
European Paper Holder
BP5380
Yorkshire Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
European Paper Holder post is die
cast from highest quality zinc alloy
(zamac). Casting is triple plated in a
polished chrome, satin nickel or old
world bronze finish. Roller arm is
aluminum.