Specification Sheet

25300 AL MOEN DRIVE
•
NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321- 8809 • FAX: [phone]
INTERNATIONAL: (440) 962- 2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882- 0116 • FAX: [phone]
WWW.CSI.MOEN.COM
Copyright Creative Specialties International 2006
Robe Hook
is die cast from high
est
quality zinc alloy (zamac) and
finished in a high quality powder
coating or metallic plated finish
q
DN6903CH
–
Robe Hook
Polished Chrome Finish
Concealed Screw Mounting
q DN6903PW – Robe Hook
Pewter Finish
Concealed Screw Mounting
q BP6903OWB – Robe Hook
Old World Bronze Finish
Concealed Crew Mounting
“BP” SKUs in wholesale
packaging
Cleaning Instructions:
1.
Position the mounting plate on the wall at desired location with “UP” facing
you.
2. One at a time, place each anchor screw through the mounting plate, centered
in each large hole. Using a Phillips screwdriver, turn the anchor screw while
applying pressure. Screw will self drill and tap into drywall. Do not over
tighten.
3. Place assembly over the mounting plate, setscrew facing down.
4. Tighten setscrew.
Stock Number:
______________________Robe Hook
By CSI Bath Furnishings
Materials:
Installation Instructi
ons:
Stock Numbers:
Dimensions:
Robe Hook
DN6903
Madison Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Literature #BA1014