Installation Sheet

25300 AL MOEN DRIVE
•
NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321- 8809 • FAX: [phone]
INTERNATIONAL: (440) 962- 2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]
WWW.CSI.MOEN.COM
Copyright Creative Specialties International 2006
Towel Ring
base
is die cast from
highest quality zinc alloy (zamac).
Ring is aluminum. Castings are
plated with a polished brass or
polished chrome finish or powder
coated white.
q
DN6986CH
(BP6986CH)
–
Towel
Ring
Polished Chrome Finish
Concealed Screw Mounting
q DN6986CB (BP6986CB) – Towel
Ring
Chrome & Brass Finish
Concealed Screw Mounting
q DN6986W – Towel Ring
White Finish
Concealed Screw Mounting
q DN6986PW (BP6986PW) – Towel
Ring
Pewter Finish
Concealed Screw Mounting
“BP” skus in wholesale packaging
Cleaning Instructions:
1.
Position the mounting plate on the wa
ll at desired location with “UP”
facing you.
2. One at a time, place each anchor screw through the mounting plate,
centered in each large hole. Using a Phillips screwdriver, turn the anchor
screw while applying pressure. Screw will self drill and tap into drywall.
Do not over tighten.
3. Place assembly over the mounting plate, setscrew facing down.
4. Tighten setscrew.
Stock Number:
______________________Towel Ring
By CSI Bath Furnishings
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Towel Ring
DN6986
Madison Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
Literature #BA1018