Dimensions Guide

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
Single Control Kitchen Faucet
Model: CA87011 series
15”
(381mm)
22”
(560mm)
7-7/8”
(200mm)
6-11/16”
(170mm)
2-1/2”
(64mm)
Max Deck
Thickness
7-11/16”
(195mm)
Rev. 9/10
NOTE: DESIGNED TO INSTALL
THRU 1 OR 3 HOLES 1-1/4” (32mm) MIN. DIA.
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• Hydrolock™ quick connect installation
• Pullout spray with 68" braided hose
• Flexible supply lines with 3/8" compression fitting connect directly to supply stop
OPERATION
• Lever style handle
• Temperature controlled by 120˚ arc of handle travel
• Spout rotation is 120˚
• Operates with less than 5lbs. of force
• Operates in stream or spray mode in the pullout or retracted position
• When filling a vessel outside the sink, the pause feature conveniently stops the flow
of water as the wand passes over the counter top
FLOW
• Aerator is limited to 2.2 gpm (8.3 L/min) max.
CARTRIDGE
• Ceramic cartridge design
• Non-metallic, non-ferrous and ceramic materials
STANDARDS
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• Third party certified to meet CSA B125.1, ASME A112.18.1 and all applicable
requirements referenced therein including NSF61/9
•
ADA for lever handle
• The backflow protection system in this device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations