Dimensions Guide

FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• Inlet shanks will accept 3/8" ball nose connections
• With and without side spray versions available
OPERATION
• Lever style handle
• Operates with less than 5 lbs. of force
FLOW
• Tap water: 2.2 gpm max (8.3 L/min)
CARTRIDGE
• 4000 ceramic disc cartridge design
• Nonmetallic/nonferrous and stainless steel material
STANDARDS
• Third party certified to CSA B-125.1, ASME A112.18.1, ICC A117.1
and all applicable requirements referenced therein
• Certified to ANSI/NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
•
ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
Touch Control®
Single Handle Lever Kitchen Faucet
with Protégé® Side Spray
Models: CA87530 series
CA87539 series (less side spray)
3-5/16”
(84mm)
6-7/8”
(171mm)
9-7/16”
(239mm)
5-3/16”
(131mm)
Rev. 1/11
NOTE: DESIGNED TO BE INSTALLED THROUGH 3 HOLES
1-1/4" (32mm) MIN. DIA. AND 4" (102mm) ON CENTER.
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com