Specification

CRITICAL DIMENSIONS
(DO NOT SCALE)
Touch Control®
Single Handle Lever Kitchen Faucet
with Protégé® Side Spray
Models: CA87530 series
CA87539 series (less side spray)
9.420”
(239mm)
5.292”
(134mm)
9.960”
(253mm)
3.898”
(99mm)
6.935”
(176mm)
Rev. 1/11
Hydrolock® is a registered trademark of COOPER STANDARD AUTOMOTIVE INC.
NOTE: DESIGNED TO BE INSTALLED THROUGH 3 HOLES
1-1/4" (32mm) MIN. DIA. AND 4" (102mm) ON CENTER.
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
FAUCET DESCRIPTION
• Metal construction with various finishes identified by suffix
• Flexible supply lines with 3/8" compression fittings
• With side spray versions available
• Hydrolock® quick-connect installation
OPERATION
• Lever style handle
• Operates with less than 5 lbs. of force
FLOW
• Tap water: 2.2 gpm max (8.3 L/min)
CARTRIDGE
• 1255™ Duralast™ cartridge
• Nonmetallic/nonferrous and stainless steel material
STANDARDS
• Third party certified to ASME A112.18.1/CSA B-125.1
and all applicable requirements referenced therein
• Certified to ANSI/NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
•
ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
There is more than 1 version of this model.
Page down to identify the version you have.