Specification Sheet
CRITICAL DIMENSIONS
(DO NOT SCALE)
Caprillo®
Single Control Kitchen Faucet
Models: CA87550 series
NOTE: DESIGNED TO INSTALL THROUGH
1 OR 3 HOLES 1-1/2" (38mm) DIA.
28-1/2”
(724mm)
9-3/4”
(247mm)
6“
(152mm)
8-1/16”
(205mm)
9-3/4”
(247mm)
2“ (50mm)
Max deck thinkness
2”
(50mm)
2-5/8”
(66mm)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
FAUCET DESCRIPTION
• Pullout faucet spout provides infinite manuverability for cleaning or rinsing
• Metal construction with various finishes identified by suffix
• Hydrolock® quick connect installation
• Pullout spray with 68” braided hose
• Flexible supplies with 3/8" compression fittings
OPERATION
• Single handle lever
• When filling a vessel outside of the sink, the pause feature conveniently
stops the flow of water as the wand passes over the countertop
• Convenient single-button actuation provides flexibility to switch from
stream to spray mode
• Temperature controlled by 120˚ arc of handle travel
• Spout receptor rotation is 120˚
• Operates with less than 5 lbs. of force
FLOW
• Maximum flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1255 cartridge design
• Engineered polymers, non-ferrous and stainless steel materials
STANDARDS
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• Third party certified to IAPMO Green ASME A112.18.1/CSA B-125.1 and all
applicable requirements referenced therein including NSF 61/9
• Meets CalGreen and Georgia SB370 requirements
•
ADA for lever handle
• The backflow protection system in this device consists of two independently
operating check valves, a primary and a secondary which prevent backflow
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
Rev. 1/11