Installation Guide

Round
Mirror
brackets
are
constructed of zinc and mirror is
constructed of glass.
q
DN
07
9
2
CH
–
Round
Mirror
Chrome Finish
q DN0792BN –Round Mirror
Brushed Nickel Finish
Cleaning Instructions:
Directions below are for installation into drywall. If installing product
into a stud, use the wood screws and washers provided only.
1. Position the mounting template on the wall in the desired location.
2. Using a level, align the template and tape it to the wall.
3. Drill two 5/16” holes as indicated on template
4. Remove the template from the wall.
5. Fold ends of the plastic toggle together and insert into each hole
in the wall.
6. Lightly tap anchors until flush with the wall.
7. One at a time, insert plastic pin into each of the anchors and
lightly tap to activate anchor. Remove pin and repeat on all
anchors.
8. Mount mirror brackets to wall by inserting screws through the
holes in the brackets into the anchors.
9. Place mirror into the bottom bracket and rotate into place behind
the top bracket.
Stock Number:
___________________Oval Mirror
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Round
Mirror
DN
07
92
Iso Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
25300 AL MOEN DRIVE
•
NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321- 8809 • FAX: [phone]
INTERNATIONAL: (440) 962- 2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]
WWW.CSI.MOEN.COM

Copyright Creative Specialties International Literature #BA1405