Use and Care Guide

Towel Ring post is die cast from
highest quality zinc alloy (Zamac).
Casting is plated in Mediterranean
Bronze. Towel Ring is stainless steel.
 DN1886BRB – Towel Ring
Mediterranean Bronze Finish
25300 AL MOEN DR I VE  N OR TH OLMSTED , OH 44070
C OR POR ATE H EAD QU AR TER S: (800) 321 -8809  F AX: [phone]
I N TER N ATION AL: (440) 962 -2000  F AX: [phone]
C U STOMER SER VI C E (U SA): 800 -882-0116  F AX: (888) 379 -2720
W W W . MOEN . C OM
Copyright Creative Specialties International Literature #BA1605
Cleaning Instructions:
1. Remove mounting posts from the product assemblies by loosening each
setscrew .
2. Position the mounting plate on the w all at desired location w ith “UP” facing
you. Mark hole locations.
3. Drill 2 holes marked using 5/16” drill bit.
4. Fold ends of the plastic toggle anchor together and insert into each hole in the
w all.
5. Lightly tap anchors until flush w ith the w all.
6. One at a time, insert plastic pin into each anchor and lightly tap to activate
anchor. Remove pin and repeat on other anchor.
7. Place the mounting plate on the w all over the installed w all anchors w ith “UP”
facing you.
8. Tighten screw s.
9. Place decorative product over the mounting plate w ith the setscrew facing
dow n. Tighten setscrew .
Stock Number:__________________________Towel Ring
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Towel Ring
DN1886
Whitley™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.