Use and Care Guide

Paper Holder
is constructed of zinc.
q
DN4108CH
–
Paper Holder
Chrome Finish
q DN4108BN – Paper Holder
Brushed Nickel Finish
q DN4108AN – Paper Holder
Antique Nickel Finish
Cleaning Instructions:
25300 AL MOEN DRIVE • NORTH OLMSTED, OH 44070 [phone] •
FAX: [phone] • INTERNATIONAL: (440) 962- 2000 •
FAX: (440) 962
-
2726 CUSTOMER SERVICE (
USA): 800
-
882
-
0116
1.
Position the mounting template on the wall in the desired location. Using a
level, align the template and tape it to the wall.
2. Place each mounting plate on the template.
3. One at a time, place each anchor screw through the mounting plate,
centered in the large hole. Using a Phillips screwdriver, turn the anchor
screw while applying pressure. Screw will self drill and tap into drywall.
4. Only insert screw ½ to ¾ into wall.
5. After all screws are installed, tear the template away from the wall
6. Tighten all 4 the screws. Do not over tighten.
7. Place each post over the mounting plate (setscrew down), pivoting post
with bar to be on left side. Tighten both setscrews.
Stock Number:
______________________Paper Holder
By CSI Bath Furnishings
Materials:
Installation Instruct
ions:
Stock Numbers:
Dimensions:
Paper Holder
DN4108
Stockton Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.

Copyright CSI Bath Furnishing Division of Moen 02/22/01
Literature #BA1152