Installation Guide

Oval Mirror
brackets
are constructed
of steel and mirror is constructed of
5MM thick glass.
q
DN
499
2BK
–
Oval Mirror
Black Finish
Cleaning Instructions:
Directions below are for installation into drywall. If installing product
into a stud, use the wood screws only.
1. Position the mounting template on the wall in the desired location.
2. Using a level, align the template and tape it to the wall.
3. Drill three 5/16” holes as indicated on template
4. Remove the template from the wall.
5. Fold ends of the plastic toggle together and insert into each hole
in the wall.
6. Lightly tap anchors until flush with the wall.
7. One at a time, insert plastic pin into each of the anchors and
lightly tap to activate anchor. Remove pin and repeat on all
anchors.
8. Mount mirror brackets to wall by inserting screws through the
holes in the brackets into the anchors.
9. Place mirror into the bottom bracket and rotate into place behind
the top bracket.
Stock Number:
___________________Oval Mirror
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimens
ions:
Oval Mirror
DN
49
92
Sienna™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
25300 AL MOEN DRIVE
•
NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321- 8809 • FAX: [phone]
INTERNATIONAL: (440) 962- 2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]

Copyright Creative Specialties International 2006 Literature #BA1352