Specification

pPrime1
Recessed Paper Holder shell is
stamped from a special alloy brass
strip
and finished with a triple plated
polished chrome finish with a lacquer
coat for added protection. Roller is
plastic and spring loaded.
Installation C-Clamp is stamped
from
type 304 steel.
 DN5075 – Recessed Paper Holder
w/ Clamp
 DN5075W – Recessed Paper
Holder w/ Clamp
Glacier Finish
Cleaning Instructions:
1. Cut a square hole into wall measuring 5 ¼” x 5 ¼”.
2. Loosely attach both screws through the recess item into the slots on
the clamp.
3. Slide the wall clamp through the wall opening angling it through the
opening if necessary.
4. Position the recess item until flush with the wall and tighten both
screws.
Stock Number:______________________Recessed
Paper Holder By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Recessed Paper Holder w/ Clamp
DN5075
Recessed Fixtures Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.
25300 AL MOEN DR I VE  N OR TH OLMSTED , OH 44070
C OR POR ATE H EADQU AR TERS: [phone]  F AX: (800) 848 -6636
I N TER N ATI ON AL: (440) 962 -2000  F AX: [phone]
C U STOMER SER VI C E (USA): 800-882-0116  F AX: (888) 379 -2720
WWW . MOEN . C OM
Copyright Creative Specialties International Literature #BA1697