Dimensions Guide

ManualsBrandsMOEN ManualsBathFold Down Teak Shower Seat in Old World Bronze

Fold Down Shower Seat is made of Aluminum

and Teak Wood

WARNING:

TO PREVENT SERIOUS OR FATAL INJURY:

Insure product is assembles and used properly.

FOR USE ONLY BY PERSONS WEIGHING

LESS THAN 400 POUNDS. Failure to follow

correct assembly procedures can cause the seat

to become unstable. DO NOT jump on, stand on

or tilt. Contact Moen immediately at 1-800-882-

0116 if any components are missing or damaged.

Do not modify or substitute any components.

FOR QUESTIONS OR ASSISTANCE WITH

ASSEMBLY CONTACT Moen AT 1-800-882-

0116. Consult healthcare professional for advice

and instructions specific to user’s needs before

use.

 DN7110 – Fold Down Shower Seat

1. Remove the top two back rest panels to reveal the top four mounting

holes.

2. Identify the mounting location of the shower seat making sure the

shower seat is level.

3. Mark the six mounting hold locations once the desired location is

determined.

4. Set aside the shower seat and drill 1/8” pilot hole through tile in each

mounting location. Drill a ¼” hole through the tile only at the same

locations to allow the wood screw to pass through.

5. When complete, ensure the wall is clear of any deprise.

6. Secure the shower seat to the wall, using the provided six wood

mounting screws. Start with the top two mounting hole locations.

7. Once all screws have been installed and tightened, slide the back

panels into place.

8. Installation is complete – Test the seat to make sure it is secure.

Stock Number:_________________ Shower Mesh Seat

By Moen Incorporated

Materials:

Installation Instructions:

Stock Numbers:

Dimensions:

Fold Down Shower Seat

DN7110

Home Care Technical Specification

25300 AL MO E N D R I VE  NO RTH O L M S TE D, OH 4 4 0 70

CO R P O RAT E HE A D Q U A RT ER S : ( 8 00 ) 3 2 1 -88 0 9  FA X: (800) 8 4 8 - 6 6 3 6

IN T E R NAT IO N A L : (440 ) 9 6 2 - 2 0 00  F A X: ( 4 4 0 ) 962 -2726

CU S T O M ER S ER V ICE ( US A): 800 -882 - 0 1 1 6  FA X: ( 88 8 ) 3 7 9 - 2720

W WW . MO E N .C O M

Copyright Moen Incorporated

Literature #BA1593

Summary of content (1 pages)

PAGE 1
Home Care Technical Specification Fold Down Shower Seat Dimensions: Stock Numbers:  DN7110 DN7110 – Fold Down Shower Seat Materials: Fold Down Shower Seat is made of Aluminum and Teak Wood Installation Instructions: 1. 2. 3. 4. WARNING: TO PREVENT SERIOUS OR FATAL INJURY: Insure product is assembles and used properly. FOR USE ONLY BY PERSONS WEIGHING LESS THAN 400 POUNDS. Failure to follow correct assembly procedures can cause the seat to become unstable. DO NOT jump on, stand on or tilt.