Dimensions Guide

Glass Shelf posts are constructed of
zinc. Shelf is tempered glass.
 DN7790BN – Glass Shelf
Brushed Nickel Finish
 DN7790CH – Glass Shelf
Chrome Finish
25300 AL MOEN DR I VE  NOR TH OLMSTED , OH 44070
C OR POR ATE H EAD QU AR TER S: (800) 321 -8809  F AX: [phone]
I N TER N ATI ON AL: (440) 962 -2000  F AX: (440) 962 -2726
C U STOMER SER VI C E (U SA): 800 -882-0116  F AX: [phone]
W W W . MOEN . C OM
Copyright Creative Specialties International Literature #BA1317
Cleaning Instructions:
1. Position the mounting template on the w all in the desired location.
2. Using a level, align the template and tape it to the w all.
3. Drill tw o 5/16” holes at each mounting post location that corresponds to your
product.
4. Remove the template from the w all.
5. Fold ends of the plastic toggle together (see Figure 1) and insert into each hole
in the w all.
6. Lightly tap anchors until flush w ith the w all.
7. One at a time, insert plastic pin into each of the anchors and lightly tap to
activate anchor (see Figure 2). Remove pin and repeat on all anchors.
8. Remove mounting posts from the product assemblies by loosening each
setscrew .
9. One at a time, place each mounting post over anchors (notch facing downw ard)
and insert screw s through post into anchors.
10. Tighten screw s.
11. Unscrew the top accent cap from both assemblies. Reassemble w ith w asher
between the glass shelf and the top accent cap.
12. Place assembly over the mounting posts w ith setscrew s facing dow n. Tighten
both setscrew s.
Stock Number:______________________Glass Shelf
By Creative Specialties
Materials:
Installation Instructions:
Stock Numbers:
Dimensions:
Glass Shelf
DN7790
Lounge™ Technical Specification
To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.