Spec Sheet

Specifications
DESCRIPTION
• Elongated electric add-on bidet toilet seat
OPERATION
• Use as a retrot product to convert regular elongated toilet seats to an
electronic cleansing eBidet
INSTALLATION REQUIREMENTS
• Fits most elongated toilets (see below for specications)
- The distance between the 2 mounting holes must be between 4-1/2"
and 7" (11.4 - 17.7cm)
- The distance from the supply valve to the eBidet inlet should be 23-9/16"
(59.8cm) or less
- The distance between the mounting holes and the edge of the toilet
bowl must be between 18" - 19-3/4"(45.7 - 50.1cm)
• Standard power outlet within 47” (119.4cm) of product required: 120V AC on
a minimum 10A circuit
• Requires minimum dynamic (owing) water pressure of 11 psi (0.08MPa)
and a maximum static (non-owing) water pressure of 116 psi (0.8MPa)
STANDARDS
• Third party certied by Intertek:
• ASME A112.4.2 / CSA B45.16 Personal hygiene devices for water closets,
which includes conformity to IAPMO / ANSI Z124.5 plastic toilet seats.
• CSA C22.2 no. 68 Motor-operated appliances (household and commercial)
• CSA C22.2 no. 64 Household cooking and liquid-heating appliances
WARRANTY
• Limited 3 year warranty against leaks and nish defects to the original
consumer purchaser
• 1 year warranty if used in commercial installations
Visit www.moen.com/support for complete details and limitations
MOEN®
eBidet
Model: EB1000
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
7/20
20-3/8"
(52cm)
9-5/8"
(24.5cm)
7-5/8"
(19.5cm)
15"
(38cm)
5-5/16"
(12.7cm)