Spec Sheet

Rev. 04/22
DESCRIPTION
• Elongated bidet toilet seat (electronic) with remote control
• Colors: White, Biscuit (PANTONE 9225 C)
OPERATION
• Use as a retrofit product to convert regular elongated
toilet seat to an electronic bidet toilet seat
INSTALLATION REQUIREMENTS
• Fits most elongated bowl (see below for specifications)
- The distance between the 2 mounting holes
must be between 4-1/2” and 7” (11.4cm - 17.7cm)
- The distance from the supply valve to the
eBidet inlet should be 23-9/16” (59.8cm) or less
- The distance between the mounting holes and the edge of the
toilet bowl must be between 18” and 19-3/4” (45.7cm - 50.1cm)
- Standard power outlet within 61” (155.1cm) of
product required: 120V AC on a minimum 10A circuit
- Requires minimum dynamic (flowing) water pressure
of 11 psi (0.08MPa) and a maximum static (non-
flowing) water pressure of 116 psi (0.8MPa)
STANDARDS
• Third party certified by Intertek:
• ASME A112.4.2 / CSA B45.16 Personal hygiene
devices for water closets, which includes conformity
to IAPMO / ANSI Z124.5 plastic toilet seats
• CSA C22.2 no. 68 Motor-operated appliances
(household and commercial)
• CSA C22.2 no. 64 Household cooking and liquid-heating appliances
• UL 1431 standard for personal hygiene and health care appliances
• ADA Compliant
WARRANTY
• Limited 3 year warranty against leaks and finish
defects to the original consumer purchaser
• 1 year warranty if used in commercial installations
Visit www.moen.com/support for complete details and limitations
Moen®
eBidet
MODELS:
EB1500-E, EB1500-EBS
15-3/16”
(38.5cm)
20-7/16”
(51.9cm)
4-13/16”
(12.3cm)
7-1/16”
(18cm)
2-1/2”
(6.4cm)
1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS DO NOT SCALE
Specifications