Spec Sheet

Rev. 04/22
DESCRIPTION
• Elongated bidet toilet seat (electronic) with
remote control and warm air drying
• Color: White
OPERATION
• Use as a retrofit product to convert regular elongated toilet
seat to an electronic bidet toilet seat with remote control
INSTALLATION REQUIREMENTS
• Fits most elongated bowl (see below for specifications)
- The distance between the 2 mounting holes must
be between 4-1/2” and 6-15/16” (11.4cm - 17.7cm)
- The distance from the supply valve to the
eBidet inlet should be 23-9/16” (59.8cm) or less
- The distance between the mounting holes and the edge of the
toilet bowl must be between 18” and 19-3/4” (45.7cm - 50.1cm)
- Standard power outlet within 61-1/16” (155.1cm) of
product required: 120V AC on a minimum 10A circuit
- Requires minimum dynamic (flowing) water pressure
of 11 psi (0.08MPa) and a maximum static (non-
flowing) water pressure of 116 psi (0.8MPa)
STANDARDS
• Third party certified by Intertek:
• ASME A112.4.2 / CSA B45.16 Personal hygiene devices for water closets,
which includes conformity to IAPMO / ANSI Z124.5 plastic toilet seats
• CSA C22.2 no. 68 Motor-operated appliances (household and commercial)
• CSA C22.2 no. 64 Household cooking and liquid-heating appliances
• UL 1431 standard for personal hygiene and health care appliances
• ADA Compliant
WARRANTY
• Limited 3 year warranty against leaks and finish
defects to the original consumer purchaser
• 1 year warranty if used in commercial installations
Visit www.moen.com/support for complete details and limitations
Moen®
eBidet
MODELS:
EB2100-E
15-1/4”
(38.8cm)
20-3/8”
(51.8cm)
5-1/4”
(13.3cm)
7-1/16”
(18cm)
2-1/2”
(6.4cm)
1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS DO NOT SCALE
Specifications