Spec Sheet

Rev. 04/22
DESCRIPTION
• Elongated bidet toilet seat (non-electronic)
• Color: White
OPERATION
• Use as a retrofit product to convert regular
elongated toilet seats to a bidet toilet seat
INSTALLATION REQUIREMENTS
• Fits most elongated bowl (see below for specifications)
- The distance between the 2 mounting holes must
be between 4-3/16” and 6-1/2” (10.7cm - 16.5cm)
- The distance from the supply valve to the
Bidet inlet should be 23-9/16” (59.8cm) or less
- The distance between the mounting holes and the edge of the
toilet bowl must be between 16-7/8” and 18-7/8” (42.8cm - 48cm)
- Requires minimum dynamic (flowing) water pressure
of 10 psi (0.07MPa) and a maximum static (non-
flowing) water pressure of 110 psi (0.75MPa)
• Does not require a power outlet
STANDARDS
• Third party certified by Intertek:
• ASME A112.4.2 / CSA B45.16 Personal hygiene
devices for water closets, which includes conformity
to IAPMO / ANSI Z124.5 plastic toilet seats
• ADA Compliant
WARRANTY
• Limited 3 year warranty against leaks and finish
defects to the original consumer purchaser
• 1 year warranty if used in commercial installations
Visit www.moen.com/support for complete details and limitations
Moen®
Bidet
MODELS:
EB500-E
14-5/8”
(37.1cm)
19-5/16”
(49.1cm)
2-5/16”
(5.9cm)
1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS DO NOT SCALE
Specifications