Spec Sheet

38 in (96.5cm)
Open view
Specifications
DESCRIPTION
• Intelligent electronic toilet with bidet cleansing and remote-control operation
INSTALLATION REQUIREMENTS
• Follows standard toilet rough-in recommendations (see below for specications)
• Standard power outlet within 47” (119.4cm) of product required: 120V AC on a
minimum 10A circuit
• Requires minimum dynamic (owing) water pressure of 11 psi (0.08MPa) and a
maximum static (non-owing) water pressure of 109 psi (0.75MPa)
FLOW
• 1.0 gpf (3.8 lpf)
STANDARDS
• Third party certied by Intertek:
• ASME A112.4.2 / CSA B45.16 Personal hygiene devices for water closets, which includes
conformity to A112.19.2 / CSA B45.1. Ceramic plumbing xtures and IAPMO / ANSI Z124.5
plastic toilet seats.
• UL 1431 standard for personal hygiene and health care appliances.
• CSA C22.2 no. 68 Motor-operated appliances (household and commercial)
• CSA C22.2 no. 64 Household cooking and liquid-heating appliances
WARRANTY
• Limited 3 year warranty against leaks and nish defects to the original
consumer purchaser
• 1 year warranty if used in commercial installations
Visit www.moen.com/support for complete details and limitations
MOEN®
eToilet
Models: See function table on pg.2 for
product dierences
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
7/20
Wall
Drain hole distance to wall12 in.
Front view
Top view
Side view
26.92 in (68cm)
15.11 in (38cm)
15.74 in (40cm)
18.50 in (47cm)
2"
(5cm)
ET1100
ET2200
Stop FrontRearDryer Flush
H/C
Massage
Nozzle
Clean
Nozzle
Forward
Water
Pressure
Water
Pressure
Nozzle
Backward
Dryer
Temp.
Water
Temp.
Night
Light
Seat
Temp
Remote Control Pair Code:
(1) Unplug the product.
(2) Press and hold the “Stop” button until the Dryer
Temp/Water Temp/Seat Temp lights start to blink.
(3) Place the remote control near the toilet and plug
the product back in.
(4) The lights of Dryer Temp/Water Temp/Seat Te mp.
will stop blinking and stay solid to indicate successful
pairing. (If remote still does not work, restart the pairing
process or check the battery.
Open/Close
cover
Open/Close
seat
Stop FrontRearDryer Flush
H/C
Massage
Nozzle
Clean
Nozzle
Forward
Water
Pressure
Water
Pressure
Nozzle
Backward
Dryer
Temp.
Water
Temp.
Night
Light
Seat
Temp
Remote Control Pair Code:
(1) Unplug the product.
(2) Press and hold the “Stop” button until the Dryer
Temp/Water Temp/Seat Temp lights start to blink.
(3) Place the remote control near the toilet and plug
the product back in.
(4) The lights of Dryer Temp/Water Temp/Seat Te mp.
will stop blinking and stay solid to indicate successful
pairing. (If remote still does not work, restart the pairing
process or check the battery.
Open/Close
cover
Open/Close
seat
Stop FrontRearDryer Flush
H/C
Massage
Nozzle
Clean
Nozzle
Forward
Water
Pressure
Water
Pressure
Nozzle
Backward
Dryer
Temp.
Water
Temp.
Night
Light
Seat
Temp
Remote Control Pair Code:
(1) Unplug the product.
(2) Press and hold the “Stop” button until the Dryer
Temp/Water Temp/Seat Temp lights start to blink.
(3) Place the remote control near the toilet and plug
the product back in.
(4) The lights of Dryer Temp/Water Temp/Seat Te mp.
will stop blinking and stay solid to indicate successful
pairing. (If remote still does not work, restart the pairing
process or check the battery.
Open/Close
cover
Open/Close
seat
7-3/4"
(19.6cm)
7-1/2"
(19cm)
2-1/4"
(5.6cm)
7/8"
(2.2cm)
Stop FrontRearDryer Flush
H/C
Massage
Nozzle
Clean
Nozzle
Forward
Water
Pressure
Water
Pressure
Nozzle
Backward
Dryer
Temp.
Water
Temp.
Night
Light
Seat
Temp
Remote Control Pair Code:
(1) Unplug the product.
(2) Press and hold the “Stop” button until the Dryer
Temp/Water Temp/Seat Temp lights start to blink.
(3) Place the remote control near the toilet and plug
the product back in.
(4) The lights of Dryer Temp/Water Temp/Seat Temp.
will stop blinking and stay solid to indicate successful
pairing. (If remote still does not work, restart the pairing
process or check the battery.
Open/Close
cover
Open/Close
seat
1-1/2"
(4cm)