Spec Sheet

Rev. 04/22
DESCRIPTION
• Electronic toilet with bidet cleansing and remote control
INSTALLATION REQUIREMENTS
-
Standard power outlet within 57-7/8” (147cm) of
product required: 120V AC on a minimum 10A circuit
- Requires minimum dynamic (flowing) water pressure of 11 psi
(0.08MPa) and a maximum static (non-flowing) water pressure of
109 psi (0.75MPa)
• Requires toilet rough-in to be 12” (30.5cm) from
center of drain hole to water supply line
FLOW
• 1.0 gpf (3.8 lpf)
STANDARDS
• Third party certified by Intertek:
• ASME A112.4.2 / CSA B45.16 Personal hygiene
devices for water closets, which includes conformity
to IAPMO / ANSI Z124.5 plastic toilet seats
• ASME A112.19.2/CSA B45.1 Ceramic plumbing fixtures
• CSA C22.2 no. 68 Motor-operated appliances
(household and commercial)
• CSA C22.2 no. 64 Household cooking and liquid-heating appliances
• UL 1431 standard for personal hygiene and health care appliances
• ADA Compliant
• Third party certified to WaterSense,® ASME A112.18.1/CSA
B125.1, and all applicable requirements referenced therein
WARRANTY
• Limited 3 year warranty against leaks and finish
defects to the original consumer purchaser
• 1 year warranty if used in commercial installations
Visit www.moen.com/support for complete details and limitations
Moen®
eToilet
MODELS:
ET900, ET1300 (shown)
27”
(68.6cm)
18-7/16”
(46.8cm)
14-15/16”
(38cm)
7-1/2”
(19cm)
2”
(5.1cm)
1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS DO NOT SCALE
Specifications