Specification Sheet

ManualsBrandsMoen ManualsShower ComponentsMoen 3/4 Inch IPS Set of 1 ExactTemp Thermostatic Rough-In Valve and 1 Volume Control Valves

CRITICAL DIMENSIONS

(DO NOT SCALE)

Spec i fi ca tions

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

3" (76mm)

3/16" (5mm)

TYP

3/4" (19mm)

Plaster Ground

Plastic Tub/Shower

Surround

4-1/2"

(114mm)

Wall Opening

2-3/4" (70mm) -

3-1/2" (89mm)

4-3/8" (111mm)

Max Depth w/Extension Kit

Finished

Wall Line

2-1/4" (57mm)

Max Wall

Thickness

3/4" (19mm)

5-1/4"

(133mm)

Wall Opening

ExactTemp®

3/4” Thermostatic Valve

Model: S3371

Rev. 1/12

DESCRIPTION

• Brass construction

• 3/4" IPS connections

• Thermostatic valve design with integral checkstops

OPERATION

• Temperature lever operates through a 340 degree arc with maximum

cold at full clockwise rotation and maximum hot at full

counterclockwise rotation

• Safety stop preset temperature at 105 degrees F ( 41degrees C)

• Safety stop override allows maximum temperature at 120 degrees F

(49 degrees C)

• Factory established temperature range from 80 degrees F (27 degrees

C) to 120 degrees F (49 degrees C)

• Must be used with at least one S3600 valve.

CARTRIDGE

• Thermostatic cartridge design with non metallic/nonferrous materials

STANDARDS

• Third party certified to meet ASME A112.18.1/CSA B-125.1, CSA

B125.3, ASSE 1016, ASSE 1070 and all applicable requirements

referenced therein

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects to the

original consumer purchaser

• 5 year warranty if used in commercial installations

5-7/8"

(149mm)

Thin Wall

Thick Wall

Summary of content (2 pages)

PAGE 1
Specifications DESCRIPTION • Brass construction • 3/4" IPS connections • Thermostatic valve design with integral checkstops OPERATION • Temperature lever operates through a 340 degree arc with maximum cold at full clockwise rotation and maximum hot at full counterclockwise rotation • Safety stop preset temperature at 105 degrees F ( 41degrees C) • Safety stop override allows maximum temperature at 120 degrees F (49 degrees C) • Factory established temperature range from 80 degrees F (27 degrees C) to 120 de
PAGE 2
Specifications DESCRIPTION • Brass construction • 3/4" IPS connections OPERATION • Flow lever operates counterclockwise through a 90˚ arc with off at 6 o’clock and maximum flow at the 3 o’clock position. Shut off in clockwise direction CARTRIDGE • Ceramic disc cartridge design INSTALLATION • Volume control valve must be installed with the arrow pointing in the water flow direction STANDARDS • Third party certified to meet CSA B-125.1, ASME A112.18.