Spec Sheet

TUB
SHOWER
COLD EXPANSION PEX
2-5/16" (59mm) C.C.
2" CC (51mm)
1-7/8" IPS (48mm)
MAX WALL
FINISHED WALL LINE
FACE OF STUD
32" (813mm) - TUB OR
TUB SHOWER
45" (1143mm)/
48" (1219mm) - SHOWER
2-1/2" MAX.
(63mm)
1/2" (13mm) MIN. CC & 5/8" (16mm) IPS
1-1/16"
(27mm)
FLOOR LINE
1-1/16"
(27mm)
L
C
1-1/2"
(38mm)
3/16" (typ) (5mm)
PLASTER GROUND
3-1/2" (89mm) MAX.
2-1/4" (57mm) MIN.
PLASTIC
TUB/SHOWER
SURROUND
DIAMETER
WALL
OPENING
FLOOR LINE
THICK WALL THIN WALL
4-1/2" (114mm) PLASTER
GROUND SIZE AND
WALL OPENING
M•PACT POSI-TEMP® VALVE
Pressure-Balancing Valve with
cold expansion Pex Connection
Model:
FP62385 (cold expansion Pex with stops)
DESCRIPTION
• Brass construction
• Cold expansion Pex connections for inlets
• Pressure balancing, four port, cycle valve
• Includes pre-installed test plug (cartridge also included inside carton)
• Allows valve to be soldered, pressure-tested, and flushed without
damaging the cartridge
OPERATION
• Adjustable temperature limit stop to control maximum hot water
temperature
• Pressure balancing mechanism maintain selected discharge temperature
to ± 3°F
CARTRIDGE
• 1222 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to meet ASME A112.18.1/CSA B-125.1 and
ASSE 1016, all applicable requirements referenced therein
• ASTM F-1960 - Standard specification for cold expansion fittings
with PEX reinforcing rings for use with Pex tubing
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the
original consumer purchaser
• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
12/15