Specification

CRITICAL DIMENSIONS
(DO NOT SCALE)
Model
Number
G2027200 7Center
G2027211 7Center
Faucet
Holes
Depth-
Inches
Drain
Placement
Model
Specified
1
Installation Detail
SINK OVERALL DIMENSION
COUNTERTOP CUT-OUT
BOWL
DIMENSION
CONTINUOUS
"U" CHANNEL
SINK
CLAMP
COUNTERTOP
SEALANT MATERIAL
R TYP.
(4) places
5/16"
(8mm)
R TYP.
(8) places
2-3/4"
(70mm)
3-1/2"
(89mm)
DIA. TYP.
1-5/8"
(41mm)
19-5/16"
(490mm)
16"
(406mm)
14"
(356mm)
26-1/16"
(662mm)
7-1/2"
(191mm)
8"
(203mm)
Specifications
SINK DESCRIPTION
• 2000 series single bowl drop-in sink
• 20 gauge stainless steel, Brushed nish
• Center drain, 1 or 4 faucet holes as indicated
• U-Channel mounting system, hardware included
• SoundSHIELD sound absorbing system
CUT OUT DIMENSIONS (For sinks manufactured after 9/1/2016)
• 26-1/16" x 19-5/16" with 3/8" corner radius. Tolerance of plus or
minus 1/16" is acceptable
STANDARDS
• Third party certied by IAPMO to meet ASME A112.19.3/CSA B45.4
and all applicable specications referenced
WARRANTY
• Limited lifetime warranty against material or manufacturing defects
to the original consumer purchaser
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 9/16
Faucet Hole Congurations
1-1/2" (38mm) Diameter faucet holes
4" (102mm) Center
There is more than 1 version of this model.
Page down to identify the version you have.
For sinks manufactured after 9/1/2016