Specification

CRITICAL DIMENSIONS
(DO NOT SCALE)
SINK DESCRIPTION
• 2200 Series single bowl drop-in sink
• 22 gauge stainless steel, Matte finish
• Center drain, 1 to 4 faucet holes as indicated
• Integrated mounting system, hardware included
• Includes SoundShield sound absorbing system
CUT OUT DIMENSIONS
• 24 3/8" x 21 3/8" with 3/8” corner radius. Tolerance of plus or
minus 1/16" is acceptable
STANDARDS
• Third party certified by IAPMO to meet ASME A112.19.3 and all
applicable specifications referenced therein
WARRANTY
• Limited lifetime warranty against material or manufacturing defects
to the original consumer purchaser
SLOWLY
TIGHTEN
THE CLIP
WITH A
SCREW
DRIVER
PUSH
UP
SINK
Installation Detail
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 11/14
Model
Number
G221943 3 7.75 Center 1
G221944 4 7.75 Center 1
G221961 1 7 Center 1
G221963 3 7 Center 1
Faucet
Holes
Depth-
Inches
Drain
Placement
Quantity
Model
Specied
G221964 4 7 Center 1
G221983 3 6.5 Center 1
G221984 4 6.5 Center 1
BG221983 3 6.5 Center 25
BG221984 4 6.5 Center 25
Faucet Hole Configurations
1-3/8" (35mm) diameter faucet holes
4" (102mm) Center
22”
(559mm)
1” (25.5mm)
R TYP.
15.5”
(394mm)
21.5”
(546mm)
25”
(635mm)
3.5”
(89mm) DIA.
4.77”
(121mm)
2.5”
(63mm)
7.73”
(196mm)
10.73”
(272mm)
1.77”
(45mm)
4"
(102mm)
4"
(102mm)
1.375"(35mm)
DIA. TYP.
1
4
4” 4” 4”
3
4” 4”