Specification Sheet
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
4/21
ADA/FHA
ADA/FHA
ADA/FHA
Model
Number
GS201962BQ 27"
GS201961BQ 17"Rear
Rear
Rear
Rear
GS201963BQ
(pictured)
3
7"
GS201964BQ 47"
GS201974LQ4 5-1/2"
Rear (Left)
GS201974RQ
GS201974BQ
4
4
5-1/2"
5-1/2"
Rear (Right)
Rear (Center)
Faucet
Holes
Depth-
Inches
Drain
Placement
ADA/FHA
Compliant*
FHA
FHA
FHA
FHA
Center
GS201964Q 47"
No
GS201963Q
3
7"
Center No
21"
(533mm)
25"
(540mm)
6"
(152mm)
15-3/4"
(400mm)
22"
(559mm)
4-1/8"
(105mm)
1-7/8"
(48mm)
3-5/8" (92mm)
DIA. TYP.
Installation Detail
MOUNTING STUD
COUNTERTOP
SINK “V” CHANNEL
SINK OVERALL DIMENSION
SEALANT
MOUNTING NUT
MOUNTING CLIP
Faucet Hole Configurations
Left Rear Conguration
Right Rear Conguration
15-1/2"
(394mm)
15-1/2"
(394mm)
5-63/64"
(152mm)
5-63/64"
(152mm)
6"
(152mm)
6"
(152mm)
SINK DESCRIPTION
• 2000 Series single bowl drop-in sink
• 20 gauge stainless steel, matte bowl finish
• U-channel mounting system, hardware included
• QuickMount™ installation included
• SoundSHIELD™ sound absorbing system
WARRANTY
• Lifetime limited warranty to the original homeowner
• 10 year limited warranty when used in a Multi-family installation
• 5 year limited warranty when used in a Commercial installation
• Visit www.moen.com/customer-support/warranty for complete details
and limitations
SINK DIMENSIONS
• Overall: 25" x 22"
• Bowl: 21" x 15-3/4"
• Drain Size: 3-5/8"
• Faucet Holes
- 1-1/2" (38mm) diameter
- 4" (102mm) center
- 8" (203mm) centers for 2 hole
CUT OUT DIMENSIONS
• 24-3/8" x 21-5/8" with 1-1/2" corner radius, tolerance of plus or
minus 1/16" is acceptable
STANDARDS
• Third party certified to meet ASME A112.19.3/CSA B45.4 and all
applicable specifications referenced therein
• *ADA/FHA Sink compliant to ADA (ICC A117.1) and FHA
accessibility specifications when installed to these required standards.
Always consult with your local building department for the specific
installation requirements.
• *FHA Sink compliant to FHA accessibility specifications when installed
to these required standards. Always consult with your local building
department for the specific installation requirements.
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions