Installation Guide

12
TIPS FOR SUCCESSFUL OPERATION
A. Be sure the disposal is empty before using your dishwasher so it can drain properly.
B. You may want to leave the stopper in the drain when not in use to prevent utensils and foreign objects falling into the disposal.
C. Your disposal is ruggedly built to give you many years of trouble free service. It will handle all normal garbages, but it will NOT grind or dispose of such items as plastic,
tin cans, bottle caps, glass, china, leather, cloth, rubber, string, clam and oyster shells, aluminum foil or feathers. These items may cause damage to the disposal and the
plumbing system.
SUGERENCIAS PARA UNA OPERACIÓN EXITOSA
A. Asegúrese de que el triturador esté vacío antes de usar su lavavajillas para que pueda desagotar correctamente.
B. Es conveniente dejar el tapón en el desagüe cuando está en desuso para evitar la caída de utensilios y otros objetos extraños en el triturador.
C. Su triturador ha sido fabricado con materiales resistentes para ofrecerle muchos años de servicio sin problemas. Manejará todos los desperdicios normales pero NO
triturará ni desechará objetos como plástico, latas de conservas, tapas de botellas, vidrio, loza, cuero, tela, caucho, hilo, conchas de almejas y ostras, papel de aluminio
o plumas. Estos objetos pueden dañar el triturador y el sistema de plomería.
CONSEILS POUR LE MAINTIEN D’UN BON FONCTIONNEMENT
A. S’assurer que le broyeur est vide avant d’utiliser le lave-vaisselle pour qu’il puisse se vider correctement.
B. Vous voudrez peut-être laisser le bouchon dans l’ouverture d’évacuation de l’évier lorsque le broyeur ne fonctionne pas pour empêcher que les ustensiles ou autres objets
ne tombent accidentellement dans le broyeur.
C. Votre broyeur a été fabriqué de manière à être robuste pour vous orir plusieurs années de service sans soucis. Il acceptera tout déchet normal, mais ne pourra pas
eectuer le broyage ou l’élimination d’articles ou de matières comme le plastique, les boîtes de conserve ou cannettes, les capuchons de bouteille, le verre, la
vaisselle, le cuir, le tissu, le caoutchouc, la corde, les coquilles de palourdes ou d’huîtres, le papier d’aluminium ou les plumes. Ces articles peuvent endommager le
broyeur et votre système de plomberie.
CLEANING AND MAINTENANCE
DO NOT ATTEMPT TO LUBRICATE YOUR DISPOSAL!
The motor is permanently lubricated. The disposal is self-cleaning and scours its internal parts with each use. NEVER put lye or chemical drain cleaners into the disposal,
as they cause serious corrosion of metal parts. If used, resulting damage can be easily detected and all warranties are void. Mineral deposits from your water can form
on the stainless steel turntable, giving the appearance of rust. DO NOT BE ALARMED, the stainless steel turntables used will not corrode or rust.
LIMPIEZA Y MANTENIMIENTO
NO TRATE DE LUBRICAR SU TRITURADOR!
El motor está permanentemente lubricado. El triturador es auto limpiante y friega sus partes internas con cada uso. No ponga NUNCA sosa cáustica o limpiadores de
desagüe químicos en el triturador, ya que causan severa corrosión de las piezas metálicas. Si los usa, el daño resultante puede ser detectado fácilmente y todas las
garantías quedarán nulas. Pueden formarse depósitos minerales de su agua sobre la placa giratoria de acero inoxidable, dando la apariencia de óxido. NO SE ALARME, las
placas giratorias de acero inoxidable utilizadas no se oxidan ni corroen.
NETTOYAGE ET ENTRETIEN
NE PAS TENTER DE LUBRIFIER VOTRE BROYEUR!
Le moteur est lubrié à vie. Le broyeur est autonettoyant et rince ses pièces internes à chaque utilisation. NE JAMAIS mettre de produits à base d’hydroxyde de sodium
ni de nettoyants chimiques de conduits d’évacuation dans le broyeur, car ces produits pourraient corroder les pièces métalliques. S’ils sont utilisés, le dommage causé sera
facilement identiable et annulera la garantie de votre appareil. Les dépôts minéraux de votre eau peuvent s’accumuler sur la table tournante en acier inoxydable, lui
donnant une apparence rouillée. IL NE FAUT PAS S’EN INQUIÉTER, car les tables tournantes en acier inoxydable utilisées ne se corrodent pas ni ne rouillent.
TROUBLESHOOTING
Before seeking repair or replacement, we recommend that you review the following:
NOISES:
• (Other than those during grinding of small bones and fruit pits): These are usually caused by accidental entry of a spoon, bottle cap, dishwasher knockout plug
(page 8, step 8) or other foreign object.
• To correct this, turn o the electrical switch and the water. After the disposal has stopped running, remove the object from the disposal. WARNING: Never put your hands
or ngers inside disposal.
• A humming noise with no grinding could be that the turn table is not rotating (see below).
UNIT DOES NOT START:
• Unplug the power cord or turn either the wall switch or breaker box switch to the “OFF” position, depending on your model and wiring conguration.
• Remove the stopper.
• Check to see if the turntable will rotate freely, in either direction, using a wooden spoon.
• If the turntable rotates freely, check the re-set button to see if it has been tripped.
• The re-set button is red and located opposite the discharge elbow, near the bottom. Push the button in until it clicks and remains depressed.
• If the re-set button has not been tripped, check for shorted or broken wires connecting to the disposal.
• Check the electrical power switch, fuse box or circuit breaker.
• If wiring and electrical components are intact, the unit may have an internal problem that requires service or replacement.
NOTE: if you are not familiar with electrical power and procedures, call a qualied electrician.
IF THE TURNTABLE DOES NOT ROTATE FREELY:
• Turn o the disposal and the water, then power o.
• After the disposal has stopped running, check for any foreign object(s) lodged between the turntable and grind ring.
• Dislodge any object(s) by rotating the turntable, in either direction, with a wooden spoon and remove the object(s). Unjamming wrench
service kit available for order on moen.com part number 1037.
• If no foreign object is present, there may be an internal problem that requires service or replacement.
• After turning the power back on, press the red reset button before resumming use.
LEAKS:
• If the unit leaks at the top, it may be due to:
1. Improper seating of the sink ange (gasket centering, sealant or tightening). – Re-check the installation.
2. Mount Screws not tightened properly. – Re-check the installation.
3. Defective or improperly installed Hush Cushion. – Re-check the installation.
• If the unit leaks at the waste elbow or from bottom of unit, it may be due to:
1. Improper installation of the discharge elbow and gasket. – Re-check the discharge elbow & gasket installation. (see page 8, step 7)
2. Improper tightening of elbow ange screws. – Re-check the discharge elbow and ange installation. (see page 8, step 7)
• If unit leaks at dishwasher hose connection:
1. Check the hose and clamp connection.
• If the unit leaks from elsewhere, there may be an internal problem that requires service or replacement.
Reset Button
Botón de reinicio
Bouton de
rétablissement