Dimensions Guide
CRITICAL DIMENSIONS
(DO NOT SCALE)
Spec i fi ca tions
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 3/11
There is more than 1 version of this model.
Page down to identify the version you have.
SPACER PROVIDED –
DISCARD IF MOUNTING
SURFACE IS MORE THAN
3/4" (19mm) THICK
1-3/4"
(45mm)
MAX.
2"
(51mm)
2"
(51mm)
4-3/8"
(111mm)
7" (178mm)
OPEN POSITION
2"
(51mm)
DECK PLATE
TOP OF
MOUNTING
SURFACE
2"
(51mm)
ESC.
WIDTH
6-1/8" (156mm)
ESCUTCHEON WIDTH
27-1/2"
(699mm)
3/8" (11mm)
COMPRESSION
FITTINGS
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Flexible supplies with 3/8” compression fittings
• Includes metal or 50/50 pop-up type waste assembly where noted
OPERATION
• Pivot action lever style handle
• Temperature controlled through 100˚ degree arc of handle travel
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge
• Nonmetallic/nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense,® CSA B-125.1, ASME A112.18.1 and
all applicable requirements referenced therein including NSF61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
•
ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
CHATEAU®
Single-Handle Lavatory Faucet
with Metal Waste Assembly
Model: L4625 series
L4631BC
Bulk Packed (12 per carton):
L64624 series
with 50/50 Waste Assembly
Bulk Packed (12 per carton):
L64625 series
Less Waste
Bulk Packed (12 per carton):
L64600 series
NOTE: THIS FAUCET IS DESIGNED TO BE
IN STALLED THRU 3-1" DIA. HOLES, 2" ON CENTER