Product Specifications

CRITICAL DIMENSIONS

(DO NOT SCALE)

Spec i fi ca tions

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

Single Function Rainfall Showerhead

with Immersion™ Rainshower

Technology

Models: S6360 series

FAUCET DESCRIPTION

• Metal construction with various finishes identified by suffix

• Immersion™ Rainshower Technology channels water through a spoke

design – concentrating and magnifying the natural force of your water

to dramatically enhance your shower experience.

OPERATION

• Single function

FLOW

• Showerhead limited to 2.5 gpm (9.5 L/min) at 80 psi

• EP suffix modesl are limited to 2.0 gpm (7.6 L/min) at 80 psi

STANDARDS

• Third party certified to meet ASME A112.18.1/ CSA B125.1 and all

applicable requirements referenced therein

• EP suffix models are IAPMO Green listed and third party certified to

WaterSense®

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects to the

original consumer purchaser

• 5 year warranty if used in commercial installations

8”

(203mm)

3-1/4”

(83mm)

Rev. 1/11

EP Suffix Models Only

PAGE 1
Specifications FAUCET DESCRIPTION • • Metal construction with various finishes identified by suffix Immersion™ Rainshower Technology channels water through a spoke design – concentrating and magnifying the natural force of your water to dramatically enhance your shower experience. OPERATION • Single function FLOW • • Showerhead limited to 2.5 gpm (9.5 L/min) at 80 psi EP suffix modesl are limited to 2.0 gpm (7.6 L/min) at 80 psi STANDARDS • Third party certified to meet ASME A112.18.1/ CSA B125.