Owner Manual

ManualsBrandsMoen ManualsBathroom Remodel & Bathroom FixturesM-CORE 3-Series 4 Port Tub And Shower Pre-Fabricated Mixing Valve With Cold Expansion PEX Connections And Stops

INS10923 - 1/20

M-CORE™ TUB AND SHOWER VALVES

These instructions must be left with the homeowner

VÁLVULAS DE BAÑERA Y DUCHA M-CORE™

Estas instrucciones deben permanecer con el propietario de la casa

SOUPAPES DE DOUCHE ET DE BAIGNOIRE M-CORE

Ces directives doivent être remises au propriétaire

Please Contact Moen First

For Installation Help, Missing or Replacement Parts

(USA)

1-800-BUY-MOEN (1-800-289-6636)

WWW.MOEN.COM

(Canada)

1-800-465-6130

WWW.MOEN.CA

Automatic Compensating Valves:

M-CORE™: For use with Showerheads rated at 1.3 GPM (4.9 L/min)

or higher

Por favor, contáctese primero con Moen

Para obtener ayuda de instalación, piezasfaltantes o de recambio

01-800-718-4345

WWW.MOEN.MX

Válvulas de compensación automática:

M-CORE™: para usarse con rosetas de 1.3 GPM (4.9 L/min) o más

Veuillez d’abord contacter Moen

en cas de problèmes avec l’installation, ou pour obtenir toute pièce

manquante ou de rechange

1-800-465-6130

WWW.MOEN.CA

Soupapes de compensation automatique

M-CORE™ : À utiliser avec des pommes de douche dont le débit

nominal est de 4,9 L/min (1,3 gpm) ou plus

Installation Guide

Guía de instalación

Guide d’installation

Moen Inc.

2816 Bristol Circle

Oakville, Ontario L6H 5S7

Canada

HELPFUL TOOLS For safety and ease of faucet replacement, Moen recommends the use of these helpful tools.

HERRAMIENTAS ÚTILES Para que el cambio de la llave sea fácil y seguro, Moen le recomienda usar estas

útiles herramientas.

OUTILS UTILES Par mesure de sécurité et pour faciliter l’installation,Moen suggère l’utilisation des outils suivants.

Regístrese en línea:

S’enregistrer en ligne :

www.moen.com/product-registration

Record Purchased Model Number:

Registro del número de modelo comprado:

Consigner ici le numéro du modèle acheté :

_______________________

(Save instruction sheet for future reference)

(Guarde la hoja de instrucciones para futura referencia)

(Garder ces directives pour référence ultérieure)

Image is for reference only

(Style varies by model)

La imagen es sólo como referencia

(El estilo varía por el modelo)

Cette image n'est oerte qu'à titre indicatif seulement

(Le style varie selon le modèle)

Model# Description

3 Port Valve 4 Port Valve CC/IPS PEX

Cold

Expansion PEX

CPVC W/ Stops

W/Prefab

Tub Drop

U130CI M-CORE 3 PORT VALVE CC/IPS X X

U130CIS M-CORE 3 PORT VALVE CC/IPS W/STPS X X X

U130CX M-CORE 3 PORT VALVE COLD PEX X X

U130CXS M-CORE 3 PORT VALVE COLD PEX W/STPS X X X

U130X M-CORE 3 PORT VALVE CRIMP PEX X X

U130XS M-CORE 3 PORT VALVE CRIMP PEX W/STPS X X X

U140CI M-CORE 4 PORT VALVE CC/IPS X X

U140CIS M-CORE 4 PORT VALVE CC/IPS W/STPS X X X

U140CX M-CORE 4 PORT VALVE COLD PEX/CC X X

U140CX-PF M-CORE 4 PORT VALVE PREFAB COLD PEX X X X

U140CXS M-CORE 4 PORT VALVE COLD PEX/CC W/STPS X X X

U140CXS-PF M-CORE 4 PORT VALVE PREFAB COLD PEX/CC W/STPS X X X X

U140V M-CORE 4 PORT VALVE CPVC/CC X X

U140VS M-CORE 4 PORT VALVE CPVC/CC W/STPS X X X

U140X M-CORE 4 PORT VALVE CRIMP PEX/CC X X

U140X-PF M-CORE 4 PORT VALVE PREFAB CRIMP PEX X X X

U140XS M-CORE 4 PORT VALVE CRIMP PEX/CC W/STPS X X X

U140XS-PF M-CORE 4 PORT VALVE PREFAB CRIMP PEX W/STPS X X X X

Summary of content (6 pages)

PAGE 1
INS10923 - 1/20 Installation Guide Guía de instalación Guide d’installation Please Contact Moen First For Installation Help, Missing or Replacement Parts (USA) 1-800-BUY-MOEN (1-800-289-6636) WWW.MOEN.COM (Canada) 1-800-465-6130 WWW.MOEN.CA Automatic Compensating Valves: M-CORE™: For use with Showerheads rated at 1.3 GPM (4.9 L/min) or higher Por favor, contáctese primero con Moen Para obtener ayuda de instalación, piezasfaltantes o de recambio 01-800-718-4345 WWW.MOEN.
PAGE 2
ENGLISH ESPAÑOL FRANÇAIS Important If a tub spout is installed, the drop and lookout must be 1/2" copper or 1/2" IPS pipe with no restrictive fittings. IMPORTANTE Si se instala un surtidor para tina de Moen, la bajada y el niple a la vista deben ser de cobre de 1/2 pulgada (12,7 mm) o de tubería IPS de 1/2 pulgada (12,7 mm) sin herrajes restrictivos.
PAGE 3
Installation Schematics/Esquemas de instalación/Schéma d’installation Tub/Shower Tina/regadera Douche/Baignoire 78" (1981mm) (2 m) 6" (152mm) (15 cm) Min. 11" (229mm) (23 cm) Max. 32" (813mm) (81 cm) Shower Only Sólo regadera Douche seulement Installation Schematics – Measuring for Ideal Tub/Shower Performance Installation of this product at non-recommended measurements may lead to issues such as water discharge from the showerhead during tub fill mode.
PAGE 4
INS10923 - 1/20 Moen has provided a plaster ground attached to the valve in the standard configuration to be used as an installation and alignment guide. The plaster ground may be configured in different ways to accommodate various installation needs and maximize the aesthetic look of the valve in the shower. The plaster ground may be left in place until the trim is installed in order to protect the valve from possible construction damage.
PAGE 5
or o ou Thin Wall Installation Instalación en paredes delgadas Installation dans un mur mince less than 1/4" (6mm) menos de 1/4" (6mm) moins de 6 mm Valve Válvula Soupape Notch Muesca Encoche Plaster Ground Plantilla de yeso Arrêt d'enduit 3-3/4" (95 mm) (9,5 cm) Note: For thin wall, plaster ground is sandwiched behind wall to support valve. Nota: Para montar sobre pared delgada, la plantilla de yeso queda atrapada detrás de la pared para soportar la válvula.
PAGE 6
Moen Limited Lifetime Warranty Moen products have been manufactured under the highest standards of quality and workmanship. Moen warrants to the original consumer purchaser for as long as the original consumer purchaser owns their home (the “Warranty Period” for homeowners), that this faucet will be leak- and drip-free during normal use and all parts and finishes of this faucet will be free from defects in material and manufacturing workmanship.