Specifications
Rev. 07/21
DESCRIPTION
• Metal Wand
• Reflex™ pulldown system offers smoother operation, easy movement and secure docking
• PowerBoost™ Technology provides boosted water performance with the push of a button
• Metal contruction with various finishes identified by suffix
• Pulldown spray with 68” braided hose
• High arc spout provides the perfect height and reach for prep sinks while the pulldown
feature provides infinite maneuverability for food preperation tasks
• 360° rotating spout
• Flexible supply lines with 3/8” compression fittings
OPERATION
• Lever style handle with alternate cross handles provided
• Maximum handle(s) rotation angle is 90° to full on
• Rotate hot side counterclockwise to open (clockwise to close)
• Rotate cold side clockwise to open (counterclockwise to close)
• Four-Function SprayWand : stream, spray, boosted stream and boosted spray
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pulldown or retracted position
FLOW
• Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1234 Duralast cartridge
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified to IAPMO Green, ASMEA112.18.1/CSAB-125.1 and all applicable
requirements referenced therein including NSF61/9&372
• Meets CalGreen and Georgia SB370 requirements
• Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
• ADA for lever handle
• The backflow protection system in this device consists of two independently operating
check valves, a primary and a secondary which prevent backflow
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to the original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
Weymouth™
Two-Handle High Arc
Pulldown Kitchen Faucet
NOTE:
THIS FAUCET IS DESIGNED
TO BE INSTALLED THOUGH 3 HOLES,
1-1/2” (36mm) MIN. DIA.
MODELS:
S73204 Series
1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS DO NOT SCALE
Specifications
3-5/8”
(92mm)
2-3/8”
(60mm)
TYP OD
9-3/16”
(233mm)
1-9/16”
(40mm)
6-1/16”
(154mm)
4”
(102mm)
7-15/16”
(202mm)
16-3/4”
(425mm)
8-15/16”
(227mm)
17.0°
4”
(102mm)
6-3/16”
(157mm)
2-1/2”(64mm)
MAX. deck
thickness