User manual

CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMA
TION C
ALL: 1-800-BUY
-MOEN
www.moen.com
SINK DESCRIPTION
• Manufactured of 18 gauge, type 301 nickel-bearing
stainless steel
• The two bowls are a minimum of 14" x 16" x 8"
• The sink ledge has four fixture mounting holes,
1-1/2" in diameter and 4" on center
• Has one 3-1/2" diameter recessed drain
opening in each bowl
• Soundshield undercoating maximizes sound
deadening and inhibits condensation
• The exposed surfaces are polished to a lustrous
satin tone finish
• Includes all necessary mounting hardware
CUT OUT DIMENSIONS
• Cut out dimensions are 32-3/8" x 21-3/8", with a
3/8" corner radius. A tolerance of plus or minus
1/16" is acceptable
STANDARDS
• Third party certified by IAPMO to meet ASME A112.19.3
and all applicable specifications referenced therein.
WARRANTY
• Warranted for fifteen years against material or
manufacturing defects
SINK OVERALL DIMENSION
C
OUNTERTOP CUT-OUT
BOWL
D
IMENSION
CONTINUOUS
"U" CHANNEL
S
INK
CLAMP
COUNTERTOP
SEALANT MATERIAL
Installation Detail
Lancelot
®
Double Bowl Kitchen Sink
Model:
22318
(LDE-3322-4)
8"
(203mm)
BOWL
DEPTH
22"
(559mm)
WIDTH
1-7/8"
(48mm)
16"
(381mm)
BOWL
4" (102mm)
TYP.
33"
(838mm)LENGTH
4-1/8"
(105mm)
2" R. TYP.
1-1/2"
(
38mm)
DIA. TYP.
8-7/8"
(225mm)
9-7/8"
(251mm)
3-1/2"
(89mm)
DIA. TYP.
3/8"
R. TYP.
1-7/8" (48mm)
14"
(356mm)
1-1/4" (32mm)
7"
(178mm)
Rev. 4/05