Specification Sheet

25300 AL MOEN DRIVE
•
NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321- 8809 • FAX: [phone]
INTERNATIONAL: (440) 962- 2000 • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]
WWW.CSI.MOEN.COM
Copyright Creative Specialties International 2006
Paper Holder
brackets are die cast from
highest quality zinc alloy (zamac) with a
triple plated polished chrome finish.
Mounting brackets are steel and riveted
to •” thick brushed aluminum wall plate.
Rollers are plastic and spring loaded.
q
R5580
–
Double Roll Surface Paper
Holder
Polished Chrome Finish
Concealed Mounting Screws
Matching Rollers
Remove rollers. Loosen set screw at the base of each post and
separate posts from wall plate. Mount wall plate with two 1 •” steel
screws. Re-attach posts to wall plate. Tighten set screw. Re-insert
rollers.
Note: Wood blocking is preferable behind all surfaces where screw-
in installation is required. If wood blocking is not available, the
following fasteners may be used: Tile / Masonry – Plastic or Lead
Anchors; Plaster / Drywall – Toggle Bolts.
Stock Number:
___________
___
Dbl
Roll Surface Paper Holder
By Creative Specialties
Materials:
Installation Ins
tructions:
Stock Numbers:
Dimensions:
Double Roll Surface Paper Holder
R5580
Hotel / Motel Technical Specification
ALL CHROME BATH HARDWARE
IS TRIPLE PLATED WITH COPPER,
NICKEL AND CHROMIUM FOR
LONG LASTING BEAUTY, AND
MEET ASTM-B86 STANDARDS.