Specification Sheet

Specifications
DESCRIPTION
• Metal Wand
• Reex™ pulldown system oers smoother operation, easy movement and secure docking
• PowerBoost™ technology provides boosted water performance with the push of a button
• Duralock™ quick connect installation
• Metal construction with various nishes identied by sux
• Pulldown spray with 68" braided hose
• High arc spout provides height and reach to ll or clean large pots while pullout wand
provides the maneuverability for cleaning or rinsing
• 360 rotating spout
• Flexible supply lines with 3/8" compression ttings
OPERATION
• Decorative and non-decorative handle lever
• Four function spray wand : stream, spray, boosted stream and boosted spray
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pulldown or retracted position
• Temperature controlled by 100 arc of handle travel
FLOW
• Flow is limited to 1.5 gpm (5.7 L/min) at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for Single-Handle Faucets
• Engineered polymers, non-ferrous and stainless steel materials
STANDARDS
• Third party certied to IAPMO Green, ASME A112.18.1/CSA B-125.1 and all applicable
requirements referenced therein including NSF 61/9 & 372
• Meets CalGreen and Georgia SB370 requirements
• Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
• ADA
for lever handle
• The backow protection system in this device consists of two independently operating
check valves, a primary and a secondary which prevent backow
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects to the original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
Sinema™
Single-Handle Pre-Rinse Spring
Pulldown Kitchen Faucet
Models: S5235 series
NOTE: THIS FAUCET IS DESIGNED
TO BE INSTALLED THROUGH 1
HOLE, 1-1/2" (38mm) MIN. DIA.
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
2/20
3-7/16" (76mm)
6"
(152mm)
10"
(254mm)
2-11/16"
(51mm)
10"
(254mm)
4-3/16"
(102mm)
3-11/16"
(76mm)
11-5/16"
(280mm)
24"
(610mm)