Specification Sheet
8-1/2
(216mm)
4-1/2”
(114mm)
Lift
Rod
3“
(76mm)
4“
(102mm)
5-1/4”
(134mm)
3/4”
(19mm)
Max. Deck
Thickness
5-3/8
(136mm)
Cold
1/2" NPT
Hot
1/2" NPT
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
ICON™
4" Lavatory Faucet
with Metal Waste Assembly
Models: S6510 series
NOTE: THIS FAUCET IS DESIGNED TO BE
IN STALLED THRU 3 HOLES, 1" MIN. DIA.
Rev. 1/16
There is more than 1 version of this model.
Page down to identify the version you have.
DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
• Includes metal pop-up waste assembly
OPERATION
• Lever style handles
• Maximum handle(s) rotation angle is 90˚ to full on
• Rotate hot side counterclockwise to open (clockwise to close)
• Rotate cold side clockwise to open (counterclockwise to close)
FLOW
• Water usage is limited to these maximum flow rates as indicated
by the corresponding product markings
° 1.2 gpm max (4.5L/min) at 60 psi
° 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1,
and all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water
efficiency regulations
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Limited lifetime warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations