Specification

10"
(254mm)
7-9/32"
(185mm)
Max Deck
Thickness
2-1/2"
(63mm)
30-5/8"
(778mm)
2-3/8 "
(59mm)
Open
1-13/16"
(46mm)
Closed
1-3/4"
(44mm)
22"
(561mm)
1"
(25mm)
1-3/8"
(35mm)
7/8"
(19mm)
Specifications
FAUCET DESCRIPTION
• Pulldown system oers smooth operation, easy movement and secure docking
• Metal construction with various nishes identied by sux
• Quick connect installation - Duralock™
• Power Boost™ spray technology
• Pulldown spray with 68" braided hose
• Flexible supply lines with 3/8" compression ttings
• High arc spout provides height and reach to ll or clean large pots while pulldown
wand provides the maneuverability for cleaning or rinsing
• Faucet designed for handle to be mounted on right side
OPERATION
• Lever style handle
• Temperature controlled by 100˚ arc of handle travel
• Operates with less than 5 lbs. of force
• Operates in stream or spray mode in the pullout or retracted position
FLOW
• Flow is limited to 1.5 gpm (5.7 L/min) max at 60 psi
CARTRIDGE
• 1255™ Duralast™ cartridge for single handle faucets
STANDARDS
• Third party certied to IAPMO Green, ASME A112.18.1/CSA B125.1 and all applicable
requirements therein including NSF 61/9 & 372
• Meets CalGreen and Georgia SB370 requirements
• Complies with California Proposition 65 and with the Federal Safe Drinking Water Act
• The backow protection system in the device consists of two independently operating
check valves, a primary and a secondary which prevent backow
• ADA
for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects to the original
homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
Weymouth®
Single Handle Pre-Rinse Spring
Pulldown Kitchen Faucet
Models: S73104 series
NOTE: this faucet is designed to be installed
through 1 hole, 1-1/2" (38mm) min. dia.
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
8/19