Specification Sheet
Specifications
CRITICAL DIMENSIONS
(DO NOT SCALE)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Traditional®
POSI-TEMP®
Single-Handle Tub/Shower Trim
Mode ls: T2121 series - valve trim only
T212
2 series - shower trim only
T2123 series - tub/shower trim
Valves: 62300 series
2500 series
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Includes showerhead, arm, flange and tub spout
OPERATION
• Lever style handle
• Handle operates counterclockwise through a 270˚arc with off
at 6 o’clock and maximum hot at the 9 o’clock position. Shut off in
clockwise direction
• Adjustable temperature limit stop to control maximum hot water
temperature
• Pressure balancing mechanism maintains selected discharge
temperature to ± 2°
FLOW
• Showerhead is limited to 2.5 gpm (9.5 L/min) at 80 psi
• EP suffix models are limited to 1.75 gpm (6.6 L/min) at 80 psi
• NH suffix models contain no showerhead
CARTRIDGE
• 1222 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to meet ASME A112.18.1/CSA B-125.1 and all
applicable requirements referenced therein
• EP suffix models are third party certified to Watersense®
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations
7"
(178mm)
ESC. DIAM.
4-1/2"
(90mm)
6'-6"
(1981mm)
Nominal
C
L
Shower
45" (1143mm)/
48" (1219mm)
1-3/8"
(35mm)
2-1/2" Max.
(63mm)
1/2" (13mm) Min. CC
5/8" (16mm) Min. IPS
2" (51mm) CC
1-7/8" (48mm) IPS Max. Wall
Face of Stud
Finished Wall Line
Floor Line
3-1/2" (90mm) Max.
2-1/4" (57mm) Min.
1-1/2" (38mm)
1-3/8" (35mm)
3/16" (typ) (5mm)
Plaster Ground
Plastic
Tub/Shower
Surround
Floor Line
Thick Wall
Thin Wall
4-3/8"
(111mm)
8-3/4"
(222mm)
L
C
TUB RIM
2-1/2"
(63mm)
4/16
M•pact System
THIN WALL APPLICATIONTHICK WALL APPLICATION
EP Suffix
Models Only