Specification Sheet

BOARDWALK™
Single-Handle Tub/Shower
Eco-Performance
DESCRIPTION
• Component construction with various finishes identified by suffix
• Pressure balancing cycle valve design with an adjustable temperature
limit stop
• 1/2" IPS connections
• Includes valve, showerhead, tub spout, arm and flange
OPERATION
• Lever style handle
• Handle operates counterclockwise through a 270˚arc with off
at 6 o’clock and maximum hot at the 9 o’clock position. Shut off in
clockwise direction
• Adjustable temperature limit stop to control maximum hot water
temperature
• Pressure balancing mechanism maintains selected discharge
temperature to ± 2°
FLOW
• Showerhead is limited to 1.75 gpm (6.6 L/min) maximum, at 80 psi
CARTRIDGE
• 1222 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein
• ADA for lever handle
• Meets WaterSense® criteria
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original consumer purchaser
• 5 year warranty if used in commercial installations
Floor Line
Plastic
Tub/Shower
Surround
Floor Line
TUB RIM
7"
(178mm)
ESC. DIAM.
3-1/2"
(90mm)
6'-6"
(1981mm)
Nominal
C
L
Shower
45" (1143mm)/
48" (1219mm)
Tub/Shower
& Tub Only
32" (813mm)
1-3/8"
(35mm)
2-1/2" Max.
(63mm)
1/2" (13mm) Min. CC
5/8" (16mm) Min. IPS
2" (51mm) CC
1-7/8" (48mm) IPS Max. Wall
Face of Stud
Finished Wall Line
3-1/2" (90mm) Max.
2-1/4" (57mm) Min.
C
L
1-3/8"
(35mm)
1-1/2" (38mm)
3/16" (typ) (5mm)
Plaster Ground
4-3/8"
(111mm)
8-3/4"
(222mm)
5-13/16"
(148mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
1/15
Model: T2161EP Series - Valve Trim Only
T2162EP Series - Shower Trim Only
T2163EP Series - Tub/Shower Trim Only