Installation Guide

ManualsBrandsMOEN ManualsPlumbingDartmoor Posi-Temp 1-Handle Wall-Mount Shower Only Faucet Trim Kit in Oil Rubbed Bronze (Valve Not Included)

Please Contact Moen First

For Installation Help, Missing or

Replacement Parts

(USA)

1-800-BUY-MOEN (1-800-289-6636)

Mon - Fri 8:00 AM to 7:00 PM, Eastern

Sat. 9:00 AM to 3:00 PM Eastern

WWW.MOEN.COM

(Canada)

1-800-465-6130

Mon - Fri 7:30 AM to 7:00 PM, Eastern

WWW.MOEN.CA

Shower heads:

Standard 9.5 L/min (2.5 gpm) max. and High Eciency 7.6 L/min (2.0

gpm) max. or less

For use with automatic compensating valves rated at 4.2 L/min (1.1

gpm) or less

Por favor, contáctese primero con Moen

Para obtener ayuda de instalación, piezas

faltantes o de recambio

011 52 (800) 718-4345

Lunes a viernes de 8:00 a 20:00 hs.

(Costa Este)

Sáb. 8:00 a 18:30 hs. (Costa Este)

WWW.MOEN.COM.MX

Roseta:

Estándar 9.5 L/min (2.5 gpm) máx. y alta eciencia 7.6 L/min (2.0 gpm)

máx. o menos

Para usarse con válvulas de compensación automática de 4.2 L/min

(1.1 gpm) o menos

Veuillez d’abord contacter Moen

En cas de problèmes avec l’installation, ou pour obtenir toute pièce

manquante ou de rechange

1-800-465-6130

Du lundi au vendredi :

de 7 h 30 à 19 h, HE

WWW.MOEN.CA

Pommes de douche :

Débit standard de 9,5 L/min (2,5 gpm) max. ou à haute ecacité

7,6 L/min (2,0 gpm) max. ou moins

À utiliser avec des soupapes de compensation automatiques dont le

débit nominal est de 4,2 L/min (1,1 gpm) ou moins

Installation Guide

Guía de Instalación

Guide d’installation

HELPFUL TOOLS

For safety and ease of faucet replacement, Moen

recommends the use of these helpful tools.

HERRAMIENTAS ÚTILES

Para que el cambio de la llave sea fácil y seguro,

Moen le recomienda usar estas útiles herramientas.

OUTILS UTILES

Par mesure de sécurité et pour faciliter l’installation,

Moen suggère l’utilisation des outils suivants.

INS1186G - 1/16

ONE-HANDLE TUB/SHOWER TRIM

MONOMANDO TERMINACIÓN

PARATINA/REGADERA

GARNITURE DE DOUCHE/

BAIGNOIREÀUNE POIGNÉE

Style varies by model

El estilo varía por el modelo

Le modèle varie par le modèle

Thread seal tape

Cinta para sellar roscas

Ruban pour joints letés

5/32 Hex

Llave Hexagonal

Clé Hexagonale

7/64 Hex

Llave Hexagonal

Clé Hexagonale

T2801

T2802

T2803

T2131

T2132

T2133

T2811

T2812

T2813

T2181

T2182

T2183

T2741

T2742

T2743

Summary of content (6 pages)

PAGE 1
INS1186G - 1/16 Installation Guide Guía de Instalación Guide d’installation Please Contact Moen First For Installation Help, Missing or Replacement Parts (USA) 1-800-BUY-MOEN (1-800-289-6636) Mon - Fri 8:00 AM to 7:00 PM, Eastern Sat. 9:00 AM to 3:00 PM Eastern WWW.MOEN.COM (Canada) 1-800-465-6130 Mon - Fri 7:30 AM to 7:00 PM, Eastern WWW.MOEN.CA T2801 T2802 T2803 Shower heads: Standard 9.5 L/min (2.5 gpm) max. and High Efficiency 7.6 L/min (2.0 gpm) max.
PAGE 2
CAUTION — TIPS FOR REMOVAL OF OLD FAUCET: Always turn water supply OFF before removing existing faucet or disassembling the valve. Open faucet handle to relieve water pressure and ensure that complete water shut-off has been accomplished. x2 PRECAUCIÓN — CONSEJOS PARA CAMBIAR LA LLAVE MEZCLADORA: Siempre CIERRE la toma de agua antes de quitar la llave existente o desmontar la válvula. Abra la llave para liberar la presión, y asegúrese de que esté bien cerrada el agua.
PAGE 3
1 Option / Opcion / Option 2 Option / Opcion / Option 2 Option / Opcion / Option No sharp edges/burrs on end of pipe. No debe haber bordes afilados ni rebabas en el extremo del tubo. Aucunes arêtes vives ni bavures à l'extrémité du tuyau. 1 H 1 3 I 3 I Thread seal tape Cinta para sellar roscas Ruban pour joints filetés 1-3/4" – 2-1/2" G 1 Thread seal tape Cinta para sellar roscas Ruban pour joints filetés 2 J O 5/32" 2 Barely tighten screw. Apriete apenas el tornillo.
PAGE 4
INS1186G - 1/16 7 HC NO NON 8 9 K 1 2 C M 1 2 D HC K L YES SI/OUI 2 1 1. Make sure cartridge stem is positioned with notch facing down. 2. Insert Key Stop (C) & Adjustable Limit Stop (D) into Stop Tube. 1. Asegúrese de que el vástago del cartucho esté colocado con la muesca hacia abajo. 2. Inserte el tope de llave (C) & el tope ajustable de límite (D) en el tubo de cierre. 1. S’assurer que la tige de cartouche est bien positionnée avec l’encoche orientée vers le bas.
PAGE 5
INS1186G - 1/16 11 13 12 L D 2 M K K 1 L 2 1 3 M + - 4 D D 1. Remove the Lever (M). 2. Remove Lever Handle Adapter (K). Note the position on the stop. 3. Remove the Adjustable Temperature Limit Stop (D), rotate clockwise to reduce maximum water temperature. 4. Re-install the Adjustable Temperature Limit Stop (D), this prevents the Lever (M) from being turned to a hotter temperature. 1. Retire la palanca (M). 2. Retire el adaptador del monomando de palanca (K). Note la posición en el tope. 3.
PAGE 6
Moen Limited Lifetime Warranty Moen products have been manufactured under the highest standards of quality and workmanship. Moen warrants to the original consumer purchaser for as long as the original consumer purchaser owns their home (the “Warranty Period" for homeowners), that this faucet will be leak- and drip-free during normal use and all parts and finishes of this faucet will be free from defects in material and manufacturing workmanship.