Specification Sheet

ManualsBrandsMOEN ManualsPlumbingBrantford Posi-Temp Rain Shower 1-Handle Shower Only Faucet Trim Kit in Oil Rubbed Bronze (Valve Not Included)

Specifications

DESCRIPTION

• Metal construction with various nishes identied by sux

• Includes showerhead, arm, ange and diverter spout

OPERATION

• Handle operates counterclockwise through a 270˚ arc with o at 6 o’clock and

maximum hot at the 9 o’clock position. Shut o in clockwise direction

• Adjustable temperature limit stop to control maximum hot water temperature

•

Pressure balancing mechanism maintains selected discharge temperature to ± 3°

FLOW

• EP sux models are limited to 2.0 gpm (7.6 L/min) max for products manu-

factured prior to June 30, 2018. EP sux models manufactured after June 30,

2018 are limited to 1.75 gpm (6.7 L/min) max.

CARTRIDGE

• 1222 cartridge design

• Nonmetallic/nonferrous and stainless steel materials

• Accommodates back to back installations

STANDARDS

• Third party certied to meet ASME A112.18.1/CSA B125.1 and all applicable

requirements referenced therein

• EP sux models are third party certied to WaterSense®

• ADA for lever handles

WARRANTY

• Lifetime limited warranty against leaks, drips and nish defects to the original

homeowner

• 10 year limited warranty when used in a multifamily installation

• 5 year limited warranty when used in a commercial installation

Visit www.moen.com/support for complete details and limitations

BRANTFORD™ POSI-TEMP®

Single-Handle Tub/Shower Trim Kit

with Rainshower

Models: T2252EP series - shower trim only

T2253EP series - tub/shower trim

Valves: 62300 series

2500 series

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

CRITICAL DIMENSIONS

(DO NOT SCALE)

Rev. 12/17

THIN WALL APPLICATION

THICK WALL APPLICATION

7" (178 mm)

ESCUTCHEON

DIAMETER

HOT

INLET

COLD

INLET

4-1/2" (114mm) WALL OPENING

FLOOR

45" (1143mm)/

48" (1219mm)-SHOWER

32" (813mm)-TUB OR

TUB SHOWER

(178 mm)

MIN

TUB RIM

6'-6"

(1981mm)

1-3/8" (35mm)

FLOOR LINE

1 3/8"

(35mm)

1 1/2"

(38mm)

3/16" (typ) (5mm)

PLASTER GROUND

3-1/2" (89mm) MAX.

2-1/4" (57mm) MIN.

DIAMETER

WALL

OPENING

PLASTIC

TUB/SHOWER

SURROUND

7“

(178mm)

3-3/8”

(86mm)

2" CC (51mm)

1-7/8" IPS (48mm)

MAX WALL

FINISHED WALL LINE

FACE OF STUD

2-1/2" MAX. (63mm)

1/2" MIN. CC (13mm)

5/8" MIN. IPS (16mm)

(203mm)

M•pact System

Summary of content (1 pages)

PAGE 1
Specifications DESCRIPTION • • Metal construction with various finishes identified by suffix Includes showerhead, arm, flange and diverter spout • Handle operates counterclockwise through a 270˚ arc with off at 6 o’clock and maximum hot at the 9 o’clock position. Shut off in clockwise direction Adjustable temperature limit stop to control maximum hot water temperature Pressure balancing mechanism maintains selected discharge temperature to ± 3° OPERATION • • FLOW • EP suffix models are limited to 2.