Specification Sheet
Rev. 07-21
DESCRIPTION
• Metal construction with various finishes identified by suffix
• Includes showerhead, arm, flange and diverter spout
• Includes red and blue temperature markings
OPERATION
• Handle operates counterclockwise through a 270˚ arc with
off at 6 o’clock and maximum hot at the 9 o’clock position.
• Shut off in clockwise direction
• Adjustable temperature limit stop to control maximum hot water
temperature
• Pressure balancing mechanism maintains
selected discharge temperature to ± 3°
FLOW
• Showerhead is limited to 2.5 gpm (9.5 L/min) at 80 psi
• EP suffix models are limited to 1.75 gpm (6.6 L/min) at 80 psi
CARTRIDGE
• 1212 cartridge design
• Nonmetallic/nonferrous and stainless steel materials
• Accommodates back to back installations
STANDARDS
• Third party certified to meet ASME A112.18.1/CSA B125.1
and all applicable requirements referenced therein
• EP suffix models are third party certified to WaterSense®
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the
original homeowner
10 year limited warranty when used in a multifamily installation
5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
CIA
™
Single-Handle POSI-TEMP® Tub/Shower Trim Kit
NOTE:
Valves: 62300 series, 2500 series
MODELS:
T2261 series - valve trim only
T2262 series - shower trim only
T2263 series - tub/shower trim
1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS DO NOT SCALE
Specifications
7”
(178mm)
7”
(178mm)
3-1/2”
(89mm)
7-3/4”
(197mm)
6-1/2”
(165mm)
7-1/4”
(184mm)
3-3/8”
(86mm)
3-1/2”
(89mm)
6’-6”
(1981mm)
45” (1143mm)/
48” (1219mm-Shower
32” (813mm)-Tub or
Tub Shower
Floor
C
L
Finished Wall Line
Face of stud
2-1/2” Max
(63mm)
1-3/8”
(35mm)