Specification

M•pact System
DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
OPERATION
• Cross and lever style handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
• Includes hot and cold temperature indicators
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1224 cartridge design
• Nonmetallic, nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense,® ASME A112.18.1, CSA B125.1, and
all applicable requirements referenced therein including NSF61/9
• Certified to ANSI/NSF 61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
WYNFORD™
Two Handle Widespread
Lavatory Faucet Trim
Models: T4520 series (lever handle)
T4524 series (cross handle)
Valve: 9000, 69000
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 3 HOLES, 1-1/8" MIN. DIA.
NOTE: FOR DECK THICKNESS 1-1/2" to 3", USE SERVICE KIT
#115001. VALVES INSTALL THROUGH 1-1/4" DIA. HOLE.
3"
(76mm)
3-3/4"
(95mm)
3-3/4"
(95mm)
Quick
Connect
Hose
Assembly
8" (203mm) - 16" (406mm)
CENTERS
COLD
INLET
HOT
INLET
2-1/2"
(64mm)
2-1/4"
(57mm)
1-1/4" (32mm)
MAX. DECK THICKNESS
4-5/8"
(117mm)
6-5/8"
(168mm)
4-3/8"
(111mm)
5-27/32"
(148mm)
6-1/2"
(165mm)
1-1/2"
(38mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
Rev. 3/15