Dimensions Guide

DESCRIPTION
• Duralock™ quick connect installation
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
• Includes metal pop-up waste assembly
OPERATION
• Lever style handles
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counter-clockwise to close)
FLOW
• Water usage is limited to these maximum flow rates as indicated by
the corresponding product markings
° 1.2 gpm max (4.5L/min) at 60 psi
° 1.5 gpm max (4.7L/min) at 60 psi
CARTRIDGE
• 1234 cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1, and
all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water
efficiency regulations
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
•
ADA for lever handles
WARRANTY
• Limited lifetime warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
BOARDWALK™
Two-Handle Widespread
Lavatory Faucet
Models: T6220 series
NOTE: SPOUT INSTALLS THROUGH 1-1/8" MIN. DIA.
HOLE. VALVES INSTALL THROUGH 1-1/8” MIN. DIA. HOLE.
For Deck Thickness 1-3/8" to 3", use service kit number
115001. Valves install through 1-1/4" dia. hole.
1-1/4" (32mm) MAX.
DECK THICKNESS
8" (203mm) -
16" (406mm) Centers
3-3/4"
(95mm)
2-15/16"
(74mm)
2.125"
(54mm)
4"
(102mm)
2-13/16"
(71mm)
3-1/8"
(79mm)
4-1/4"
(133mm)
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
Rev. 3/16