Spec Sheet

Rev. 07-21
DESCRIPTION
• Duralock™ quick connect installation
• Metal construction with various finishes identified by suffix
• 1/2” IPS connections
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90° to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close
• Includes optional hot and cold temperature indicators
FLOW
• Water usage is limited to these maximum flow rates as indicated by
the corresponding product markings
° 1.2 gpm max (4.5L/min) at 60 psi
CARTRIDGE
• 1234™ Duralast™ cartridge
• Nonmetallic, nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense,® ASME A112.18.1/CSA
B125.1, and all applicable requirements referenced therein
• Certified to NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water
efficiency regulations
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects to
the original homeowner
10 year limited warranty when used in a multifamily installation
5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
CIA™
Two Handle Widespread Lavatory Faucet Trim
NOTE:
THIS FAUCET IS DESIGNED TO BE INSTALLED THROUGH 3 HOLES,
1-1/8” (29mm) MIN. DIA.
FOR DECK THICKNESS 1-1/2” to 3”, USE SERVICE KIT #175709.
VALVES INSTALL THROUGH 1-1/4” DIA. HOLE.
Valve: 9000, 69000
MODELS:
T6222 series
1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS DO NOT SCALE
Specifications
2-7/8”
(73mm)
3-3/8”
(85mm)
2-1/4”
(57mm)
9”
(229mm)
5”
(127mm)
5-1/2”
(140mm)
1/8”
(3mm)