Specification

VOSS™
Two Handle Widespread
Lavatory Faucet
Models: T6905 series
Valve: 9000, 69000
NOTE: THIS FAUCET IS DESIGNED TO BE INSTALLED
THRU 3 HOLES, 1-1/8" MIN. DIA.
3-1/2"
(89mm)
Handle Base
2-1/8" (54mm)
2-3/4"
(70mm)
8“
(203mm)
Spout Base
2-1/4" (57mm)
4-1/2"
(114mm)
4-5/8"
(117mm)
5-7/8"
(149mm)
Lift
Rod
1-11/32"
(34mm)
1-1/4” (32mm) MAX.
DECK THICKNESS
DESCRIPTION
• Metal construction with various finishes identified by suffix
• 1/2" IPS connections
• Hot and cold temperature indicators available
• Includes metal pop-up waste assembly
OPERATION
• Lever style handles
• Maximum handle rotation angle is 90˚ to full on for either handle
• Hot side counterclockwise to open (clockwise to close)
• Cold side clockwise to open (counterclockwise to close)
FLOW
• Flow is limited to 1.5 gpm max (5.7L/min) at 60 psi
CARTRIDGE
• 1224 cartridge design
• Nonmetallic, nonferrous and stainless steel material
STANDARDS
• Third party certified to WaterSense,® ASME A112.18.1/CSA B125.1, and
all applicable requirements referenced therein including NSF61/9
• Contains no more than 0.25% weighted average lead content
• Complies with California Proposition 65 and with the Federal Safe
Drinking Water Act
• ADA for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and finish defects
to the original consumer purchaser
• 5 year warranty if used in commercial installations
CRITICAL DIMENSIONS
(DO NOT SCALE)
S p e c i f i c a t i o n s
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
6/13
M•pact™ System