Specification Sheet
MOEN SPECIFIER SER VIC ES 1-800-321-8809 Ext. 2158
www.moen.com
Specifications
CRITICAL DIMENSIONS
(DO NOT SCALE)
36"
(912mm)
12"
(305mm)
FLOOR LINE
ESCUTCHEON
HANDLE
DIRECTION
OF HANDLE
ROTATION
6-3/4"
(171mm)
L
C
3" (76mm)
MIN. WALL
CAVITY
6'-6"
(1981mm)
NOMINAL
7" (178mm)
ESC. DIAM.
4-1/2” (114mm)
PLASTER GUARD
OPENING
2 1/2" MAX.
(63mm)
1/2" MIN. CC (13mm)
5/8" MIN. IPS (16mm)
FINISHED
WALL LINE
3-16" - 2"
H
C
F
O
3-7/16"
(87mm)
2-3/4"
(69mm) Min.
3"
(76mm)
Min.
Wall
Cavity
2-3/4"
(69mm)
Platerguard
Opening
5"
(127mm)
Esc.
Diameter
28-1/2"
NOMIMAL
(723mm)
FLOOR LINE
6'-6" (1981mm)
NOMINAL
DROP ELL
TUB RIM
FINISHED
WALL LINE
1/2-14 NPT
1/2-14
NPSL
THREAD
2" Dia.
3-5/16"SPRAY
HEAD
DIAMETER
8-1/8"SPRAY WAND
HEIGHT
DESCRIPTION
• Metal construction with Chrome plated or Classic Brushed Nickel (CBN) finish
• Pressure balancing cycle valve design with 1/4 turn stops
• 3 function transfer valve
• 1/2” CC connections
• Contains: stationary showerhead, hand-held shower with non-positive pause,
69" metal hose, 30" slide bar, drop ell,
Slide bar is NOT DESIGNED TO BE A GRAB BAR
• Applicable components are supplied with vandal resistant screws
OPERATION
• Temperature and transfer valves both have ADA compliant lever style handles
• Temperature handle operates counterclockwise through a 270° arc with off
at 6 o’clock, and the maximum hot at the 9 o’clock position
• Adjustable temperature limit stop
• Pressure balancing mechanism maintains selected discharge temperature to ± 2°
• Transfer valve operates 3 distinct functions
FLOW
T8342 (2.5 gpm/9.5 L/min) - Chrome finish
T8342CBN (2.5 gpm/9.5 L/min) - Classic Brushed Nickel finish
T8342EP15 (1.5 gpm/5.7 L/min) - Chrome finish, WaterSense® certified
T8342EP15CBN (1.5 gpm/5.7 L/min) - Classic Brushed Nickel finish, WaterSense® certified
CARTRIDGE
• Pair with a brass Posi-Temp rough-in valve:
• 8370HD*: 1/2" CC connection without integral stops
• 8371HD*: 1/2" CC connection with integral stops
• 8372HD*: 1/2" IPS connection with integral stops
• 8373HD*: 1/2" PEX connection with integral stops
• 8374HD*: 1/2" CPVC connection with integral stops
• 8375HD*: 1/2" UPONOR connection with integral stops
*Includes the 1222HD Brass Posi-Temp Cartridge
• Nonmetallic/nonferrous and stainless steel materials
• Also requires the 3360 3 function transfer rough-in valve
• Accommodates back to back installations
STANDARDS
• Third party certified to: WaterSense® (only applies to 1.5 gpm), ASME A112.18.1/CSA B125.1 and all
applicable requirements referenced therein
• Backflow prevention compliance through ASME A112.18.3
•
ADA for lever handles
WARRANTY
• Warranted for 5 years against material or manufacturing defects
Three-Function Commercial
Shower System
Rev. 8/14
NOTE: This valve is not intended to be used as a shut-off valve. To prevent the potential of cross flow, check valves must be integral to the supply valve or installed in both hot and cold water supply lines.
EP Models Only