Dimensions Guide
MOEN SPECIFIER SER VIC ES 1-800-321-8809 Ext. 2158
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
Specifications
DESCRIPTION
• ADA compliant operation
• Metal and brass construction with Chrome plated or
Classic Brushed Nickel (CBN) finish
• Inlets and outlets on same plane
• Supplied with vandal resistant screws
OPERATION
• Lever style handle with function indicators
on the escutcheon
• Detents at each flow position
• Rotary 360° handle operation
• Valve operates 3 distinct functions but can be
plumbed for 2 distinct functions
CARTRIDGE
• Ceramic disk cartridge
• Pair with 3360, 3 function transfer rough-in valve
STANDARDS
• Third party certified to meet ASME A112.18/CSA B125.1
and all applicable requirements therein including NSF61/9
• for lever handle
WARRANTY
• Warranted for 5 years against material or manufacturing defects
Three-Function Commercial
Transfer Valve Trim Kit
Model: T8360
T8360CBN
FINISHED
WALL LINE
3-16" - 2"
3-7/16"
(87mm)
2-3/4" (69mm)
Min.
3" (76mm)
Min. Wall
Cavity
2-3/4"
(69mm)
Platerguard
Opening
5"
(127mm)
Esc. Diameter
Rev. 10/12
NOTE: This valve is not intended to be used as a shut-off valve. To prevent the potential of cross flow, check valves must be integral to the supply valve or installed in both hot and cold water supply lines.
ADA
C O M M E R C I A L