Dimensions Guide

ManualsBrandsMoen ManualsShower SystemsTRANSITIONALSPAORB

CRITICAL DIMENSIONS

(DO NOT SCALE)

DESCRIPTION

• Various finishes identified by suffix

• Handheld shower

• 69" double interlock spiral hose (metal)

• Double check valves in handshower

• 30" slide bar with push button height selection

OPERATION

• 4-function: massage, vigorous, full and combination: rotate

outer ring to select

• Handshower holder rotates to adjust angle of hand shower

FLOW

• EP suffix models are limited to 2.0 gpm (7.6 L/min) at 80 psi

STANDARDS

• Designed and manufactured to comply with the applicable

re quire ments of ASME A112.18.1/CSA B-125.1 and ASSE 1014

and all applicable specifications referenced therein

• EP suffix models are third party certified to WaterSense®

WARRANTY

• Lifetime limited warranty against material or manufacturing defects

4-Function Massaging Handshower

w/Slide Bar

Models: 3667EP series

FINISHED

WALL LINE

30-5/8"

(778mm)

Drop ell sold

separately

4-3/8"(111mm)

SPRAY HEAD

DIAMETER

9-11/16"(246mm)

SPRAY WAND

HEIGHT

Hole Size

5/8" (17mm)

1-1/2" (39mm)

1-1/2” max

wall thickness

S p e c i f i c a t i o n s

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

4/13

EP suffix models only

Summary of content (7 pages)

PAGE 1
S p e c i f i c a t i o n s DESCRIPTION • • • • • Various finishes identified by suffix Handheld shower 69" double interlock spiral hose (metal) Double check valves in handshower 30" slide bar with push button height selection OPERATION • • 4-function: massage, vigorous, full and combination: rotate outer ring to select Handshower holder rotates to adjust angle of hand shower FLOW • EP suffix models are limited to 2.0 gpm (7.
PAGE 2
Specifications FAUCET DESCRIPTION • Metal construction with various finishes identified by suffix • Includes 7" rainshower showerhead, arm, flange and tub spout OPERATION • Flow lever operates counterclockwise through a 90˚ arc with off at 6 o'clock and maximum flow at the 3 o'clock position.
PAGE 3
Specifications DESCRIPTION • Metal construction with various finishes identified by suffix OPERATION • Lever style handle operation STANDARDS • Third party certified to meet ASME A112.18.1/CSA B-125.
PAGE 4
S p e c i f i c a t i o n s DESCRIPTION • • Single function spray with various finishes identified by suffix Immersion technology OPERATION • Spray face tilts 20 degrees in any direction FLOW • Designed to deliver 2.0 gpm max (7.6 L/min) at 80 psi STANDARDS • Third party certified to ASME A112.18.1/ CSA B125.
PAGE 5
Specifications DESCRIPTION • Metal construction with chrome plated, antique nickel, antique bronze, LifeShine® brushed bronze, LifeShine® brushed nickel, LifeShine® hammered nickel, nickel, oil rubbed bronze, LifeShine® polished brass, platinum, pewter, LifeShine® satine, glacier or wrought iron finishes WARRANTY • Warranted for one year against material or manufacturing defects DROP ELL Models: A725, A725AN, A725AZ, A725BB, A725BN, A725HN, A725NL, A725ORB, A725P, A725PM, A725PW, A725ST, A725W, A725WR Fin
PAGE 6
S p e c i f i c a t i o n s DESCRIPTION • Brass construction • 3/4" IPS connections • 13 gpm @ 60 psi OPERATION • Flow lever operates counterclockwise through a 90˚ arc with off at 6 o’clock and maximum flow at the 3 o’clock position. Shut off in clockwise direction CARTRIDGE • Ceramic disc cartridge design INSTALLATION • Volume control valve must be installed with the arrow pointing in the water flow direction STANDARDS • Third party certified to meet CSA B-125.1, ASME A112.18.
PAGE 7
Specifications DESCRIPTION • • • Metal construction 1/2" CC and IPS connections Includes mounting bracket and test plug STANDARDS • Third party certified to ASME A112.18.1/ CSA B125.1, and all applicable requirements referenced therein WARRANTY • Lifetime limited warranty against leaks to the original consumer purchaser • 5 year warranty if used in commercial installations Body Spray Rough-In Model: S1300 3-1/4" ± 3/8" (82mm ± 10mm) CONNECTOR TO FINISHED WALL 8-1/2" (216mm) 1/2" CC/NPT DIA.