Spec Sheet

6 3/4"
(171 mm)
10 9/16"
(268 mm)
6 5/8"
(168 mm)
3 9/16"
(90 mm)
Shower
45" (1143 mm) Min.
48" (1219 mm) Max.
Tub only &
Tub/Shower
32" (813 mm)
Wall Opening
4 1/2"
(114 mm)
6' 6"
(1981 mm)
L
C
2 1/2"
(64 mm)
1 3/8"
(35 mm)
1 3/8"
(35 mm)
Tub Rim
Finished wall line
Face of stud
Plastic
Tub/Shower
Surround
(typ)
3/16"
(5 mm)
Plaster
Ground
Floor
Diameter Wall Opening
3 1/2" (89 mm) Max.
2 1/4" (57 mm) Min.
CC
1/2" (13 mm)
Min.
CC
1 7/8" (48 mm)
Max.
IPS
2" (51 mm)
Max.
IPS
5/8" (16 mm)
Min.
2 1/2"
(63 mm)
Max.
7 3/4"
(197 mm)
CRITICAL DIMENSIONS
(DO NOT SCALE)
Rev. 10/21
FOR MORE INFORMATION CALL: 1-800-289-6636
www.moen.com
FAUCET DESCRIPTION
Metal construction with various finishes identified by suffix
Includes showerhead, arm, flange and diverter spout
OPERATION
Handle operates counterclockwise through a 270˚ arc with off at 6 o’clock
and maximum hot at the 9 o’clock position. Shut off in clockwise direction
Adjustable temperature limit stop to control maximum hot water
temperature
Pressure balancing mechanism maintains selected discharge temperature
to ± 3°
FLOW
Showerhead is limited to 2.5 gpm (9.5 L/min) at 80 psi
EP suffix models are limited to 1.75 gpm (6.6 L/min) at 80 psi
NH suffix models contain no showerhead
CARTRIDGE
1222 cartridge design
Nonmetallic/nonferrous and stainless steel materials
Accommodates back to back installations
STANDARDS
Third party certified to meet ASME A112.18.1/CSA B125.1 and all applicable
requirements referenced therein
EP suffix models are third party certified to WaterSense®
ADA for lever handle
WARRANTY
Lifetime limited warranty against leaks, drips and nish defects to the
original homeowner
10 year limited warranty when used in a multifamily installation
5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
DOUX POSI-TEMP®
Single-Handle Tub/Shower Trim Kit
Models: TS2201 series - valve only trim
TS2202 series - shower only trim
TS2203series - tub/shower trim
Valves: 62300 series
2500 series
Spec i fi ca tions
EP Suffix Models Only
M•pact System

Summary of content (1 pages)