Dimensions Guide
Specifications
DESCRIPTION
• ADA compliant operation
• Metal and brass construction with various nishes identied by sux
• Inlets and outlets on same plane
• Supplied with vandal resistant screws
OPERATION
• Lever style handle
• Detents at each ow position
• Rotary 180° handle operation
• Valve operates 2 distinct functions
CARTRIDGE
• Ceramic disk cartridge
STANDARDS
• Third party certied to meet ASME A112.18/CSA B125.1 and all
applicable requirements therein
• ADA for lever handle
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects to
the original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
NOTE: This valve is not intended to be used as a shut-o valve. To
prevent the potential of cross ow, check valves must be integral to the
supply valve or installed in both hot and cold water supply lines.
ARRIS™
Two/Three Function
Transfer Valve Trim Kit
Models: TS23005 series
Valve: 3372 or 3375
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
4/18
5"
127mm
5"
127mm
3-1/8"
79mm
Face of Stud
Finished Wall Line
Max. Wall Thickness
2"
51 mm
Thick Wall Installation
2-9/16"
65 mm
Face of Stud
Finished Wall Line
3/16" “Typ”
5 mm
Thin Wall Installation
Min. Wall Opening
2-1/8"
54 mm
Min. Wall Opening
2-1/2"
64 mm
There is more than one version of this model.
Page down to identify the version you have.